Is your 2016 Toyota Corolla key fob acting up? Before you schedule a pricey dealership visit, a simple battery replacement might be the solution. This guide will walk you through everything you need to know about your 2016 Toyota Corolla Key Fob Battery, from identifying signs of a dying battery to successfully replacing it yourself.
Recognizing a Dying Key Fob Battery
Key fob batteries don’t last forever. Here are some telltale signs that yours might be nearing its end:
- Decreased Range: Are you noticing that you need to be much closer to your Corolla for the key fob to unlock the doors or pop the trunk? This reduced range is often the first indicator of a weakening battery.
- Intermittent Functionality: Does your key fob sometimes work perfectly and then act up moments later? This inconsistency is another strong indicator that the battery is struggling to hold a charge.
- Dashboard Warning: Some Toyota Corollas will display a “Key Fob Battery Low” warning message on the dashboard when the battery needs replacing.
What Battery Does My 2016 Toyota Corolla Key Fob Use?
The 2016 Toyota Corolla key fob is powered by a CR2032 battery, a common type of lithium coin battery readily available at most electronics stores, supermarkets, and online retailers.
How to Replace the Battery in Your 2016 Toyota Corolla Key Fob
Replacing the battery in your 2016 Toyota Corolla key fob is a quick and easy process that you can do at home in minutes. Here’s a step-by-step guide:
- Locate the Release Button: On the back of your key fob, you’ll find a small release button or switch.
- Open the Key Fob: Press the release button and gently separate the two halves of the key fob. You might need to use a flathead screwdriver or a coin to help pry it open.
- Identify the Battery: Inside the key fob, you’ll see the CR2032 battery nestled in its compartment.
- Remove the Old Battery: Carefully pry out the old battery. You can use your fingernail or a small, flat tool. Avoid using anything sharp that could damage the key fob or battery.
- Install the New Battery: Insert the new CR2032 battery into the compartment, making sure the positive (+) side faces up.
- Reassemble the Key Fob: Align the two halves of the key fob and press them together firmly until you hear a click, indicating they are securely closed.
Testing Your New Key Fob Battery
Once the new battery is installed, test all the functions of your key fob (locking/unlocking doors, remote start, panic button) to ensure it’s working correctly.
Expert Tip from John Davis, Automotive Technician: “After replacing the battery, it’s always a good idea to check your owner’s manual to see if there are any specific procedures for resetting or re-syncing your key fob to your Corolla.”
Extending the Life of Your Key Fob Battery
While key fob battery replacement is inevitable, there are a few things you can do to prolong the life of your battery:
- Avoid Excessive Button Pressing: While it’s tempting to repeatedly press the lock button to confirm your car is secure, this can drain the battery faster.
- Store Your Key Fob Properly: Extreme temperatures (both hot and cold) can impact battery life. Avoid leaving your key fob in direct sunlight or inside a freezing car for extended periods.
- Keep it Dry: Moisture is no friend to electronics. Ensure your key fob stays dry to prevent corrosion or damage to the battery.
Still Having Issues?
If you’ve replaced the battery and are still experiencing issues with your 2016 Toyota Corolla key fob, there might be other factors at play. Here are some additional resources:
Conclusion
Replacing the battery in your 2016 Toyota Corolla key fob is a simple DIY task that can save you time and money. By following the steps in this guide, you can get your key fob back in working order in no time. Remember to keep spare CR2032 batteries on hand so you’re always prepared.
FAQs
Q: How long does a Toyota Corolla key fob battery typically last?
A: On average, a Toyota Corolla key fob battery will last between 3 to 5 years, depending on usage and environmental factors.
Q: Can I use any brand of CR2032 battery for my Toyota Corolla key fob?
A: While any brand of CR2032 battery will technically work, it’s generally recommended to use a reputable brand known for quality and longevity.
Q: What if I replace the battery and my key fob still doesn’t work?
A: If you’ve replaced the battery and your key fob is still malfunctioning, there might be an issue with the key fob itself, or it may need to be reprogrammed. Consult your owner’s manual or contact a qualified automotive locksmith or dealership for assistance.
Q: My key fob is physically damaged. Can I still replace the battery?
A: If your key fob has suffered physical damage, it’s best to consult a professional. They can assess the damage and advise you on the best course of action, which might involve repair or replacement.
Q: My Toyota Corolla key fob is auto-locking by itself. What could be the issue?
A: This could be related to a few things. Check out this article for more information: 2005 toyota prius key fob autolocking by itself
Do you have other questions about your Toyota Key Fob or need help with programming a new one? Here are some resources that might be helpful:
Get in touch with us! Our team of car experts is available 24/7 to answer your questions and provide assistance via WhatsApp: +1(641)206-8880 or email: [email protected].
Leave a Reply