Programming a new key fob for your 1999 Ford Explorer can seem daunting, but it’s often simpler than you think. Whether you’ve lost your key, need a spare, or your old one is malfunctioning, this guide will walk you through the process of programming a new 1999 Ford Explorer key fob.
Understanding Your 1999 Ford Explorer Key Fob Options
Before diving into programming, it’s important to identify the correct key fob for your 1999 Ford Explorer. There are different types available, and using the wrong one can lead to frustration. The most common type is the standard key fob with lock, unlock, and panic buttons. Some models might also have remote start functionality. Knowing your specific Explorer’s trim level will help determine the correct key fob.
1999 Ford Explorer Key Fob Types: Standard, Remote Start, and Aftermarket Options
DIY Programming vs. Professional Service for 1999 Ford Explorer Key Fob
Many 1999 Ford Explorer owners successfully program their key fobs themselves. The process usually involves a specific sequence of steps involving the ignition, door locks, and key fob buttons. While DIY can be cost-effective, it does require careful attention to detail. If the sequence isn’t followed precisely, the programming may not work.
If you’re uncomfortable with DIY, a locksmith or dealership can program your 1999 Ford Explorer key fob for you. This option often comes with a fee, but it guarantees correct programming and can save you time and potential headaches. For more information on Ford key fob programming in general, check out our guide on how to reprogram ford key fob.
Step-by-Step Guide to Programming a 1999 Ford Explorer Key Fob Yourself
For those inclined to try DIY programming, here’s a general guide. Remember, this is a general outline, and slight variations might exist depending on the specific trim level of your Explorer. Always consult your owner’s manual for the exact procedure.
- Gather your materials: You’ll need all your key fobs, including existing and new ones.
- Enter your vehicle: Sit in the driver’s seat with all doors closed.
- Cycle the ignition: Turn the ignition from OFF to RUN (the position just before starting the engine) eight times within ten seconds, ending in the RUN position.
- Programming mode: The vehicle should chime, indicating it’s entered programming mode.
- Press any button: Press any button on the new key fob. The vehicle will chime again, confirming the fob is programmed.
- Repeat step 5: Repeat this step for any additional key fobs.
- Exit programming mode: Turn the ignition OFF. Test all key fobs to ensure they function correctly.
Common Problems and Troubleshooting
Sometimes, even after following the steps carefully, the programming might not work. Here are some common issues and their solutions:
- Incorrect sequence: Double-check the steps in your owner’s manual to ensure you followed them precisely. If you’re unsure about any step, consider seeking professional help.
- Dead key fob battery: A dead battery in the new key fob will prevent programming. Replace the battery and try again. Perhaps your other Ford key fob has a similar problem, as discussed on our 2004 ford explorer key fob battery page.
- Faulty key fob: The new key fob itself might be faulty. Try programming a different key fob to rule out this possibility. Consider similar issues experienced by owners of the 1999 Ford Taurus, covered in our guide on the 1999 ford taurus key fob.
- Vehicle system issues: In rare cases, a problem with your vehicle’s electrical system might be preventing programming. A qualified technician should diagnose and address this issue. The process can be similar to programming a 2005 Ford GT key fob, which you can learn about on our 2005 ford gt key fob page.
Troubleshooting 1999 Ford Explorer Key Fob Programming Issues: Battery Check, Sequence Verification, and Professional Assistance
Conclusion
Programming a new key fob for your 1999 Ford Explorer can be a manageable task with the right information and approach. Whether you choose DIY or professional programming, having a working key fob provides convenience and peace of mind.
FAQs
- How many key fobs can I program to my 1999 Ford Explorer? You can usually program up to four key fobs.
- What if I lose all my key fobs? If you lose all your keys, you’ll likely need to have your vehicle towed to a dealership or locksmith for programming.
- Can I program a used key fob to my 1999 Ford Explorer? Yes, you can typically program a used key fob as long as it’s the correct type for your vehicle. Learn more about programming key fobs for newer Ford models like the 2016 Ford Fusion on our page dedicated to 2016 ford fusion key fob programming.
- Why isn’t my key fob working after programming? Double-check the programming steps, try a new battery, or seek professional assistance.
- How long does it take to program a Key Fob? The process usually takes only a few minutes.
For further assistance, please contact us via WhatsApp: +1(641)206-8880, Email: [email protected], or visit us at 123 Maple Street, New York, USA 10001. Our 24/7 customer support team is ready to help.
Leave a Reply