Lost your key fob or need to program a new one for your 2006 Honda Accord? Reprogramming your key fob for your 2006 Honda Accord can be done easily at home without a trip to the dealership. This guide provides simple, step-by-step instructions to program your 2006 Honda Accord key fob quickly and efficiently. Please remember that this process will erase all previously programmed remotes, so you will need to reprogram all of your key fobs at the same time.
Here’s how to program your 2006 Honda Accord key fob:
-
Turn the ignition switch to the ON position (II). The dashboard lights should illuminate.
-
Press the LOCK or UNLOCK button on one of your key fobs. It doesn’t matter if the key fob is already programmed or brand new for this initial step.
-
Turn the ignition switch to the LOCK position (0), effectively turning the car off.
-
Repeat steps 1, 2, and 3 two more times. Make sure to use the same key fob button (LOCK or UNLOCK) each time you repeat step 2.
-
Turn the ignition switch to the ON position (II) one last time.
-
Press the LOCK or UNLOCK button on the same key fob you used in the previous steps. If you have successfully entered programming mode, the power door locks should cycle (lock and then unlock) automatically. This confirms you are now in programming mode.
-
For each key fob you wish to program, press the LOCK or UNLOCK button. After pressing a button on each key fob, the door locks should cycle again, indicating that the system has accepted the signal from that remote.
-
Turn the ignition switch to the LOCK position (0) to exit the key fob programming mode.
-
Test each of your programmed key fobs to ensure they are working correctly. Press the LOCK and UNLOCK buttons to verify that they control the door locks.
If you need to purchase a replacement key fob for your 2006 Honda Accord, visit Keylessentryremotefob.com for a wide selection of key fobs and remotes. You can find the specific key fob part number OUCG8D-380H-A for your vehicle on our site.
Important Notes:
- Ensure you complete each step within 5 seconds of the previous one to prevent the system from exiting programming mode prematurely.
- If the door locks do not cycle after step 6, start the process again from step 1.
- This programming procedure is specifically for the 2006 Honda Accord model. Programming steps may vary for other Honda models and years.
By following these instructions, you can easily program your 2006 Honda Accord key fob and regain full remote access to your vehicle.
