Losing or damaging your car key fob can be a major inconvenience. If you own a 2009 Chevrolet Malibu, you might be wondering about your options for a replacement. This guide provides you with essential information about getting a new key fob for your 2009 Chevy Malibu, covering everything from replacement keys to programming.
Understanding the Transponder Key for Your 2009 Chevy Malibu
The 2009 Chevrolet Malibu utilizes a transponder key system. This means that the key isn’t just a physical piece of metal cut to match your car’s ignition; it also contains a microchip (transponder) that communicates with your car’s immobilizer system. This chip must be programmed to your vehicle for the engine to start. Simply cutting a new key will not be enough to get you back on the road.
Key Features and Compatibility
When looking for a 2009 Chevrolet Malibu Key Fob replacement, it’s important to ensure compatibility. This aftermarket transponder key is designed to be a direct replacement for the original GM key and is compatible with the B111-PT key blank. It uses a Philips 46 (Circle+) chip ID, ensuring it meets the technical specifications for your vehicle’s security system.
This key is also a suitable replacement for various part numbers including:
- A1: GMX320, GMX-100C, GMX-272C, GMX381C
- Ilco: B111-PT
- Hata: HAT320PK, HAT-100C, HAT381CP
- Jet: GMX320PHT, GMX381CPPHT
- Strattec: 693126, 692139, 5904001, 692933, 692932, 692931, 593254, 693121, 693127, 692930, 5913736
- OEM: 23372322
Beyond the 2009 Chevrolet Malibu, this key is also compatible with a wide range of other GM vehicles from model years spanning 2004 to 2017, including Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, and Suzuki models (see full compatibility list in the original article).
Key Cutting and Programming: Essential Steps
To use your new 2009 Chevrolet Malibu key fob, you will need to have it both cut and programmed.
Key Cutting:
This key blank must be professionally cut by a locksmith or at a hardware store. They will need to match the cuts to your vehicle’s ignition system. Be prepared to provide proof of vehicle ownership, such as your registration or insurance card, to verify you are authorized to have the key made.
Key Programming:
The good news is that you can program this 2009 Chevy Malibu key fob yourself at home if you already have at least one working key. Instructions for both adding an extra key and programming when all keys are lost are provided below.
Programming Instructions for Your 2009 Chevrolet Malibu Key Fob
To Add An Extra Key (You Must Have At Least One Working Key):
- Insert an existing, programmed working key into the ignition cylinder.
- Turn the ignition to the ON position for 5 seconds, then turn it back to the OFF position.
- Remove the existing key and within 5 seconds, insert the new, unprogrammed key into the ignition. Turn it to the ON position for 5 seconds.
- Turn the key to the OFF position then back to the ON position. The new key is now programmed. Start your Chevrolet Malibu to test the key.
All Keys Lost/Misplaced Programming:
If you have lost all of your working keys, the programming process is slightly longer and requires a 30-minute wait period:
- Insert the new, cut key into the ignition cylinder and turn it to the ON position. The security light on your dashboard will illuminate and remain on for approximately ten minutes. When the security light turns off, you have one minute to proceed to the next step.
- Turn the ignition cylinder to the OFF position and then back to the ON position. The security light will again illuminate for ten minutes. Once it goes out, you have one minute to proceed.
- Repeat step 2 one more time. Turn the ignition cylinder to the OFF position and then back to the ON position. The security light will illuminate for a final ten-minute period.
- After the security light has turned off for the third time, turn the key to the OFF position and remove it from the ignition. The key is now programmed, and any previously programmed keys that were not present during this process will be erased.
- Insert the newly programmed key and start your vehicle to test if the programming was successful.
Important Notes
- Professional Cutting Required: This key must be cut by a professional locksmith or hardware store. We do not offer key cutting or programming services.
- Transponder Chip is Essential: This key contains a hidden transponder chip, which is crucial for your vehicle’s security system. Cutting the key without programming the transponder chip will not allow you to start your 2009 Chevrolet Malibu.
- Satisfaction Guaranteed: This aftermarket ignition key comes with a 90-day 100% satisfaction guarantee and warranty.
With the right replacement key and these programming instructions, getting back on the road with your 2009 Chevrolet Malibu key fob is straightforward and hassle-free.
