2013 BMW 128i Key Fob Battery: What You Need to Know

Owning a 2013 BMW 128i is a joy, until that dreaded moment your key fob starts acting up. Before you panic and imagine costly trips to the dealership, a dying key fob battery is often the culprit. Let’s dive into everything you need to know about your 2013 Bmw 128i Key Fob Battery.

Signs Your Key Fob Battery Needs Replacing

Several tell-tale signs indicate your key fob battery needs replacing. You might notice:

• Decreased range: Your car only unlocks when you’re standing right next to it.
• Intermittent functionality: Sometimes it works, sometimes it doesn’t, leaving you stranded in parking lots.
• Slow response: Pressing the buttons requires multiple attempts or a longer hold for your car to respond.
• Dashboard warning: Your BMW may display a “Key Fob Battery Low” message.

If any of these ring a bell, it’s time for a battery swap.

What Type of Battery Does a 2013 BMW 128i Key Fob Use?

Your 2013 BMW 128i key fob uses a CR2032 battery – a common type found at most grocery stores, pharmacies, and online retailers. Always opt for a reputable brand to ensure optimal performance and longevity.

How to Change the Battery in Your 2013 BMW 128i Key Fob

Replacing the battery is a simple DIY task that takes less than five minutes. Here’s how:

1. Locate the release button: This is usually on the back of the key fob.
2. Release the metal key: Press the button and slide out the metal key.
3. Open the fob: Use the metal key or a small flat-head screwdriver to pry open the key fob casing along the seam.
4. Remove the old battery: Carefully pry out the old battery, noting its orientation.
5. Insert the new battery: Place the new CR2032 battery in the same position, positive (+) side up.
6. Reassemble the fob: Snap the casing back together.
7. Test the key fob: Ensure all buttons function correctly.

Prolonging Your Key Fob Battery Life

Although key fob batteries have a limited lifespan, there are a few things you can do to make them last longer:

• Avoid frequent button presses: Only press the buttons when necessary.
• Keep it away from extreme temperatures: Don’t leave your key fob in direct sunlight or freezing temperatures.
• Store it properly: Avoid storing your key fob near electronic devices that could interfere with its signal.

FAQs

How long does a 2013 BMW 128i key fob battery last?

Typically, the battery lasts between 3 to 5 years, depending on usage and environmental factors.

Can I drive my BMW with a low key fob battery?

Yes, you can still start and drive your BMW with a low key fob battery. However, you’ll need to use the metal key to unlock the doors.

What if I replace the battery, and my key fob still doesn’t work?

If replacing the battery doesn’t solve the problem, there might be a more significant issue with your key fob, and it’s best to consult a qualified BMW technician.

Still Have Questions About Your 2013 BMW 128i Key Fob?

Key Fob issues can be frustrating. If you need further assistance or have any questions, our team of experts at KeyFobX is here to help. Contact us via WhatsApp at +1(641)206-8880 or email us at [email protected]. We’re available 24/7 to assist you.