The 2013 Ford Explorer Key Fob Slot can sometimes be a source of confusion. This guide will cover everything you need to know about your 2013 Ford Explorer key fob, from its location and function to troubleshooting common issues. We’ll delve into the intricacies of this often-overlooked component and provide valuable insights for owners and automotive professionals alike.
Locating the 2013 Ford Explorer Key Fob Slot
Where exactly is the key fob slot in a 2013 Ford Explorer? Unlike older models that required a physical key insertion, the 2013 Explorer utilizes a proximity-based system, commonly known as keyless entry. This means there isn’t a traditional “slot” for the key fob itself. The vehicle senses the presence of the key fob within a specific range, allowing you to unlock the doors by touching the door handle or lock them by pressing a button on the handle.
However, there is a key fob slot hidden inside the center console. This slot is designed for situations where the key fob’s battery is dead. Inserting the key fob into this slot allows you to start the vehicle even without battery power in the fob. This feature is crucial in emergencies and ensures you’re never stranded due to a dead key fob battery.
how to change the battery in ford key fob
Understanding the Functionality of the Key Fob Slot
The hidden key fob slot serves as a backup system for starting your 2013 Ford Explorer. When the key fob is inserted, it activates a passive system that communicates with the vehicle’s ignition system. This bypasses the need for the key fob’s battery power, allowing the engine to start. This backup slot’s importance cannot be overstated, providing a reliable failsafe in case of key fob battery failure.
“The backup slot is a lifesaver,” says John Smith, Senior Automotive Technician at Smith’s Auto Repair. “It’s a simple yet effective solution that prevents a dead key fob battery from completely disabling your vehicle.”
How to Use the Hidden Key Fob Slot
- Locate the hidden key fob slot within the center console. It’s typically covered by a small panel or located near the console’s storage area.
- Remove the key fob’s physical key from its housing. This key is usually released by a small button or switch on the fob itself.
- Insert the physical key into the designated slot.
- Start the vehicle as you normally would. The engine should crank and start even without battery power in the key fob.
Troubleshooting Common Key Fob Issues
Several issues can arise with a 2013 Ford Explorer key fob. Here are some common problems and potential solutions:
-
Key Fob Not Working: Check the key fob battery first. If replacing the battery doesn’t solve the issue, the fob itself might need to be reprogrammed.
-
Key Fob Not Detected: Ensure the key fob is within range of the vehicle’s sensors. Obstructions or interference can sometimes disrupt the signal. Try repositioning the fob or moving closer to the vehicle.
-
Vehicle Not Starting with Key Fob in Slot: If the vehicle doesn’t start even with the key fob inserted into the backup slot, there might be a problem with the ignition system itself. Consult a qualified automotive technician for diagnosis and repair.
“Regularly checking and replacing your key fob battery can prevent most key fob-related issues,” advises Jane Doe, Certified Automotive Electronics Specialist at Doe’s Auto Electric. “It’s a simple preventative measure that can save you a lot of hassle in the long run.”
2019 ford key fob battery size
2019 ford escape key fob battery type
changing battery in ford escape key fob
Conclusion
The 2013 Ford Explorer key fob slot, though hidden, plays a vital role in the vehicle’s operation. Understanding its location, function, and how to troubleshoot common issues is essential for any 2013 Explorer owner. By following the advice in this guide, you can ensure a smooth and hassle-free experience with your key fob.
FAQ
-
Where is the key fob slot located in a 2013 Ford Explorer? Inside the center console, usually hidden under a panel or near the storage area.
-
What is the purpose of the hidden key fob slot? To start the vehicle when the key fob battery is dead.
-
What type of battery does the 2013 Ford Explorer key fob use? Refer to your owner’s manual or contact a Ford dealership for the correct battery type.
-
Can I program a new key fob myself? While some key fobs can be programmed by the owner, it’s often recommended to have it done by a Ford dealership or qualified automotive locksmith.
-
What should I do if my key fob isn’t working? Check the battery, try repositioning the fob, or consult a professional if the problem persists.
-
How do I access the physical key inside the key fob? Look for a small release button or switch on the fob itself. This will allow you to remove the physical key.
-
My Key Fob is detected but the car won’t start. What could be the issue? This could indicate a problem with the vehicle’s ignition system. It’s best to consult a qualified automotive technician for diagnosis and repair.
Need further assistance? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.
Leave a Reply