Replacing the key fob battery in your 2013 Ford Explorer Limited is a quick and easy process that can save you the hassle and expense of a trip to the dealership. This guide provides clear, step-by-step instructions to help you get your key fob working like new again.
Knowing how to change your key fob battery can be a real lifesaver, especially if you’re stranded somewhere with a dead key fob. This guide focuses specifically on the 2013 Ford Explorer Limited, addressing common issues and providing expert tips. You’ll be back on the road in no time! Just after the first few steps, you’ll see how simple this process really is. For similar key fob information, you can check out our guide on the 2013 Ford Focus Titanium key fob battery.
Locating the Battery Compartment
First, locate the small slot on the side of your key fob. This slot is specifically designed to help you separate the two halves of the key fob casing.
Opening the Key Fob
Insert a small flathead screwdriver or a similar tool (even a coin can work!) into the slot and gently pry the two halves apart. Be careful not to apply too much pressure, as you could damage the casing. Inside, you’ll see the battery. This process is similar to how you would change a 2017 Ford Edge key fob, though the key fob design might be slightly different.
2013 Ford Explorer Key Fob Opened with Battery Exposed
Identifying the Battery Type
The 2013 Ford Explorer Limited key fob uses a CR2032 battery, a common type found in many electronics. These are readily available at most stores. It’s always good to have a spare or two on hand.
Removing the Old Battery
Gently pry the old battery out of its compartment using your screwdriver or fingernail. Again, be cautious not to damage the contacts within the key fob.
Installing the New Battery
Insert the new CR2032 battery into the compartment, ensuring the positive (+) side is facing upwards. You should feel a slight click when it’s properly seated.
Closing the Key Fob
Align the two halves of the key fob casing and press them firmly together until they snap shut. Test all the buttons to ensure the new battery is working correctly.
Installing New CR2032 Battery in Ford Explorer Key Fob
Troubleshooting
If your key fob still isn’t functioning after replacing the battery, there might be another underlying issue. Consult your owner’s manual or a qualified technician for further assistance. You can also find helpful information on our website regarding how to change the battery in a Ford Explorer key fob.
Key Fob Maintenance Tips
- Regular Replacement: It’s a good idea to replace your key fob battery every 2-3 years, even if it’s still working, to avoid unexpected failures.
- Avoid Extreme Temperatures: Extreme heat or cold can affect battery life.
- Keep it Dry: Moisture can damage the internal components of your key fob.
Why is my 2013 Ford Explorer key fob not working after battery replacement?
Sometimes, even after replacing the battery, your key fob might not work. This could be due to a variety of reasons, such as corroded battery terminals, a faulty key fob, or even a programming issue. If this happens, checking resources like our page on the 2013 Ford Explorer key fob battery change can be very helpful.
Where can I find a CR2032 battery for my Ford Explorer?
CR2032 batteries are widely available at most electronics stores, pharmacies, and even supermarkets. You can also find them online.
Can I replace the key fob battery myself?
Absolutely! Replacing the key fob battery is a simple DIY task that almost anyone can handle. This guide provides all the necessary steps. However, if you encounter any difficulties, you can also visit a local auto parts store or a locksmith for assistance. You can also explore our guide on situations where a 2011 Ford F-150 key fob will not work.
CR2032 Battery for Ford Explorer Key Fob
Conclusion
Replacing the battery in your 2013 Ford Explorer Limited key fob is a straightforward process. With a few simple tools and this guide, you can easily do it yourself and save time and money. Remember to always use a high-quality CR2032 battery for optimal performance.
FAQ
- What type of battery does the 2013 Ford Explorer Limited key fob use? A CR2032 battery.
- How often should I replace my key fob battery? Every 2-3 years.
- What should I do if my key fob still doesn’t work after replacing the battery? Consult your owner’s manual or a qualified technician.
- Where can I purchase a new CR2032 battery? Electronics stores, pharmacies, and supermarkets.
- Is it difficult to replace the Key Fob battery myself? No, it’s a simple DIY task.
- What tools do I need to replace the battery? A small flathead screwdriver or similar tool.
- How long does it take to replace the battery? Just a few minutes.
Need further assistance? Reach out to our 24/7 customer support team via WhatsApp: +1(641)206-8880, or Email: [email protected].
Leave a Reply