Replacing the key fob battery in your 2013 Ford Taurus Limited is a quick and easy process that can save you time and money. A dead key fob battery can leave you stranded, so knowing how to replace it yourself is a valuable skill. This guide provides step-by-step instructions and helpful tips to get your key fob working like new again.
Why is My 2013 Ford Taurus Key Fob Not Working?
There are several reasons why your key fob might not be functioning correctly. One of the most common culprits is a dead battery. Other possibilities include a faulty key fob, programming issues, or even problems with your car’s receiver. However, starting with the battery is always the simplest and often the most effective solution. If your key fob is acting erratically, or the buttons require multiple presses, a low battery is a strong possibility.
2013 Ford Taurus Limited Key Fob Battery Location: Illustrative guide showing the location of the key fob battery compartment and release latch.
How to Change the Battery in a 2013 Ford Taurus Limited Key Fob
Changing the battery in your 2013 Ford Taurus Limited key fob is a straightforward process, usually requiring just a few minutes and a small flathead screwdriver. Here’s a detailed guide:
-
Locate the Key Release: On the side of your key fob, you’ll find a small release button or switch. Press this button and slide the metal key out of the fob.
-
Open the Key Fob: Use the tip of the flathead screwdriver to carefully pry open the key fob casing. Start by inserting the screwdriver into the slot where the metal key was located. Gently twist the screwdriver to separate the two halves of the fob. Be careful not to damage the plastic.
-
Identify the Battery: Once open, you’ll see the small, round CR2032 battery. Note its position and orientation.
-
Remove the Old Battery: Gently pry the old battery out of its compartment using your flathead screwdriver. Avoid damaging the contacts within the fob.
-
Insert the New Battery: Place the new CR2032 battery into the compartment, ensuring it’s positioned correctly, matching the orientation of the old battery.
-
Reassemble the Key Fob: Carefully align the two halves of the key fob and press them together until they snap shut.
-
Test the Key Fob: Try locking and unlocking your car to confirm the new battery is working correctly.
This process is similar to changing the battery in a 2017 ford taurus key fob programming.
Where to Buy a 2013 Ford Taurus Key Fob Battery?
CR2032 batteries are readily available at most electronics stores, pharmacies, and online retailers. For the best results, choose a reputable brand to ensure quality and longevity.
What Type of Battery Does a 2013 Ford Taurus Limited Key Fob Take?
The 2013 Ford Taurus Limited key fob uses a CR2032 battery, a common type of lithium coin cell battery. These batteries are known for their long lifespan and reliability. Just like with the how to change battery in ford explorer key fob, it’s crucial to use the correct battery type for optimal performance.
How Long Does a Ford Taurus Key Fob Battery Last?
The lifespan of a Ford Taurus key fob battery typically ranges from 2 to 5 years, depending on usage and environmental factors. If you’re experiencing issues with your key fob, consider checking the battery even if it’s relatively new, as manufacturing defects can occur.
Similar to the 2013 ford edge limited key fob, regular maintenance can help extend the life of your key fob.
Tools Needed for Ford Taurus Key Fob Battery Replacement: A flathead screwdriver and a new CR2032 battery.
Conclusion: Maintaining Your 2013 Ford Taurus Limited Key Fob
Replacing the battery in your 2013 Ford Taurus Limited key fob is a simple DIY task that can prevent unexpected inconveniences. By following the steps outlined above, you can keep your key fob functioning perfectly. If you continue to experience problems after replacing the battery, you may want to consider checking for other issues or consult a professional locksmith or Ford dealership. This might be a sign of a more serious problem similar to 2013 ford taurus key fob not working.
FAQ:
- What type of battery does my 2013 Ford Taurus Limited key fob use? A CR2032 battery.
- How do I open my Ford Taurus key fob? Use a small flathead screwdriver to carefully pry it open.
- Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
- How long does a Ford Taurus key fob battery last? Typically 2-5 years.
- What should I do if my Key Fob still doesn’t work after replacing the battery? Consult a professional or your Ford dealership.
- Can I replace the battery myself? Yes, it’s a simple DIY task.
- What tools do I need to replace the battery? A small flathead screwdriver.
Need further assistance? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected], or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.
Leave a Reply