2013 Mazda 3 Key Fob Battery Size: What You Need to Know

Owning a 2013 Mazda 3 means experiencing the joy of driving a sleek, reliable car. But even the most reliable cars need a little TLC now and then, especially when it comes to those all-important key fobs. If your Mazda 3 key fob is acting up – maybe the lock/unlock buttons are sluggish or the car isn’t responding – it might be time for a fresh battery. But what size battery does a 2013 Mazda 3 key fob take?

Finding the Right Battery for your 2013 Mazda 3 Key Fob

Don’t worry, we’ve got you covered! The 2013 Mazda 3 key fob uses a CR2025 battery, a common type found at most supermarkets, electronics stores, and online retailers. This small, coin-shaped battery packs enough power to keep your key fob functioning smoothly.

How to Replace Your Mazda 3 Key Fob Battery

Replacing the battery in your 2013 Mazda 3 key fob is a breeze, even for those of us who aren’t mechanically inclined. Here’s a step-by-step guide:

Locate the small slot on the back of your key fob. This is usually located near where the two halves of the fob connect.
Use a small flathead screwdriver or a coin to gently pry open the key fob. Be careful not to force it.
Identify the old CR2025 battery and note its position (positive (+) side up).
Gently remove the old battery and dispose of it properly.
Insert the new CR2025 battery, ensuring the positive (+) side faces up, just like the old one.
Carefully snap the two halves of the key fob back together.

And that’s it! You’ve successfully replaced the battery in your 2013 Mazda 3 key fob.

Common Issues and Troubleshooting

Still having trouble with your key fob even with a new battery? Here are a few additional tips:

Check the battery contacts inside the key fob for any dirt or corrosion. Clean them gently with a cotton swab and rubbing alcohol if needed.
Try reprogramming your key fob to your Mazda 3. You can find instructions for this in your owner’s manual.
If the problem persists, there may be an issue with the key fob itself, and you may need to consult a qualified Mazda technician.

Don’t let a dead key fob battery slow you down. Armed with the right information and a new CR2025 battery, you can keep your 2013 Mazda 3 running smoothly.

FAQs

Q: How long does a Mazda 3 key fob battery last?

A: Typically, a Mazda 3 key fob battery can last anywhere from 2 to 5 years depending on usage.

Q: Can I use a different battery size in my 2013 Mazda 3 key fob?

A: No, it’s crucial to use the correct battery size, which is a CR2025. Using a different size could damage the key fob.

Q: My Mazda 3 key fob still isn’t working after replacing the battery. What should I do?

A: Try cleaning the battery contacts or reprogramming the Key Fob. If the problem persists, consult a Mazda technician for further assistance.

Need Help with Your Mazda Key Fob?

Still having trouble? We can help! Check out our other helpful articles:

If you need personalized assistance, contact our team of automotive experts through WhatsApp: +1(641)206-8880, or email us at [email protected]. We’re available 24/7 to answer your questions.