Is your 2013 Ford Transit key fob acting up? Before you schedule a trip to the dealership, a dying battery might be the culprit. Replacing it yourself is a simple task that can save you time and money. This guide will walk you through the process step-by-step.
Recognizing a Dying Key Fob Battery
A few telltale signs indicate your key fob battery needs replacing. If you’ve noticed any of these issues, it’s time to grab a new battery:
- Decreased Range: You find yourself standing closer to your Transit than usual to lock or unlock the doors.
- Intermittent Functioning: The key fob sometimes works and sometimes doesn’t, even when standing close to the vehicle.
- No Response: Your Transit doesn’t respond to any key fob commands, even when pressing the buttons repeatedly.
Gathering Your Supplies
Before you begin, gather these simple tools:
- Replacement Battery: A CR2032 battery. These are readily available at most hardware and electronics stores.
- Small Flathead Screwdriver: This is needed to pry open the key fob casing.
Replacing the Battery: A Step-by-Step Guide
- Locate the Key Release: On the back of your key fob, you’ll see a small button or switch. Press this to release the metal key blade.
- Open the Key Fob: Carefully insert the flathead screwdriver into the groove where the key blade was located. Gently pry open the two halves of the key fob casing.
- Remove the Old Battery: The CR2032 battery will be visible. Gently pry it out, noting the orientation for the positive (+) side.
- Install the New Battery: Insert the new battery, making sure the positive (+) side faces the same direction as the old one.
- Reassemble the Key Fob: Align the two halves of the casing and press them together firmly until you hear a click.
- Reinsert the Key Blade: Slide the metal key blade back into its slot.
- Test Your Key Fob: Try locking and unlocking your Transit to make sure the new battery works correctly.
Still Having Issues?
If your key fob still isn’t working after replacing the battery, there might be a different issue. Here are a few possibilities:
- Programming Required: In some cases, you might need to reprogram your key fob after a battery change. Refer to your owner’s manual for instructions.
- Key Fob Damage: Physical damage to the key fob itself could be the culprit. Inspect it for any cracks, water damage, or other issues.
- Vehicle Malfunction: In rare cases, there might be a problem with your Transit’s keyless entry system. If you suspect this, it’s best to consult a qualified mechanic or dealership.
Replacing the battery in your 2013 Ford Transit key fob is a quick and easy DIY task. With a little time and effort, you can get your key fob working like new and save yourself a trip to the dealership.
Remember, KeyFobX is your go-to resource for all things Key Fob related. Check out our website for more helpful guides, reviews, and information on car Key Fobs.
Leave a Reply