If you’re driving a 2014 Ford Fusion, chances are you’ve encountered a flashing dashboard message about a low key fob battery. Don’t panic, it’s a simple fix! This article will guide you through the process of changing your 2014 Ford Fusion key fob battery and reactivating it, getting you back on the road in no time.
What You’ll Need to Change Your Ford Fusion Key Fob Battery
Before you begin, gather the following items:
- A new CR2032 battery: These are readily available online or at your local auto parts store.
- A small flathead screwdriver: You’ll need this to open the key fob casing.
How to Change the Battery in Your 2014 Ford Fusion Key Fob
Follow these easy steps to change your key fob battery:
- Locate the key release button on the back of your key fob.
- Press the button and slide out the metal emergency key.
- Insert the flathead screwdriver into the slot where the emergency key was.
- Gently pry open the key fob casing. Be careful not to damage the internal components.
- Carefully remove the old CR2032 battery. Note the orientation of the positive (+) and negative (-) sides.
- Insert the new battery, ensuring it’s facing the same direction as the old one.
- Snap the key fob casing back together.
- Reinsert the metal emergency key.
Reprogramming Your Ford Fusion Key Fob After Battery Replacement
Some Ford Fusion models require you to reprogram your key fob after a battery change. While your vehicle may not need this, it’s best to be prepared. Here’s how to do it:
- Get inside your Ford Fusion and close all doors.
- Insert the key into the ignition cylinder.
- Turn the ignition from “Off” to “Run” eight times within ten seconds. Don’t start the engine!
- The doors will lock and unlock to confirm programming mode.
- Press any button on the key fob. The doors will lock and unlock again to confirm successful programming.
- Repeat steps 4 and 5 for any additional key fobs.
Common Questions About 2014 Ford Fusion Key Fob Batteries
Q: How often should I change my Ford Fusion key fob battery?
A: It’s generally recommended to replace your key fob battery every 3 to 5 years, or sooner if you notice a decrease in range or functionality.
Q: What are the signs of a dying key fob battery?
A: Common signs include:
- Decreased range: You need to be closer to your vehicle for the key fob to work.
- Intermittent functionality: Buttons work only sporadically.
- Dashboard warning light: Your Fusion’s display may show a “Key Fob Battery Low” message.
Q: Can I use any type of CR2032 battery for my Ford Fusion key fob?
A: While any CR2032 battery will technically work, it’s best to use a reputable brand known for quality and longevity.
Q: My key fob still isn’t working after replacing the battery. What should I do?
A: Double-check that the battery is properly installed and that the contacts are clean. If you’re still experiencing issues, it’s possible there’s a problem with the key fob itself, and you may need to consult a Ford dealership or qualified automotive locksmith.
Need More Help with Your Ford Fusion Key Fob?
Replacing your 2014 Ford Fusion Key Fob battery is a quick and straightforward process. By following these simple steps, you can avoid the inconvenience of a dead Key Fob and get back on the road with confidence. If you have any further questions or need assistance, don’t hesitate to contact our team of experts via WhatsApp at +1(641)206-8880 or email us at [email protected]. We’re available 24/7 to provide the support you need!
Leave a Reply