2014 Subaru Crosstrek Key Fob Battery Replacement: A Comprehensive Guide

If your 2014 Subaru Crosstrek key fob is acting up, a dead battery might be the culprit. This guide covers everything you need to know about replacing your 2014 Subaru Crosstrek Key Fob Battery, from identifying the right battery to step-by-step replacement instructions. We’ll also delve into some frequently asked questions and troubleshooting tips.

Recognizing a Dying Key Fob Battery in Your 2014 Subaru Crosstrek

Several tell-tale signs indicate your 2014 Subaru Crosstrek key fob battery is nearing its end. Reduced range is often the first noticeable symptom. You might find yourself having to stand closer to your car than usual to lock or unlock it. Another common sign is a weaker signal. The car might take longer to respond to your key fob, or you might have to press the buttons multiple times. Dimming indicator lights on the key fob itself can also suggest a low battery. Finally, if your key fob stops working altogether, a dead battery is almost certainly the problem.

2014 Subaru Crosstrek key fob exhibiting symptoms of a low battery, such as reduced range and dim indicator lights.

Which Battery Does My 2014 Subaru Crosstrek Key Fob Need?

The 2014 Subaru Crosstrek key fob uses a CR2032 battery, a common type of lithium coin cell battery readily available at most stores that sell batteries. You can even find them online. These batteries are known for their long lifespan and reliable performance.

How to Replace the 2014 Subaru Crosstrek Key Fob Battery

Replacing the battery in your 2014 Subaru Crosstrek key fob is a straightforward process that you can easily do yourself, saving you a trip to the dealership. Here’s a step-by-step guide:

Locate the small notch or slot on the side of your key fob. This is typically located near the key ring.
Insert a small flathead screwdriver or a similar tool into the notch and gently twist to separate the two halves of the key fob casing. Be careful not to apply too much pressure, which could damage the casing.
Once the casing is open, identify the CR2032 battery. It’s usually located in a small compartment.
Carefully remove the old battery using your screwdriver or a small non-metallic tool. Avoid touching the battery terminals with your fingers.
Insert the new CR2032 battery, making sure the positive (+) side is facing up.
Align the two halves of the key fob casing and press them together until they snap shut.
Test your key fob to ensure it’s working correctly. Try locking and unlocking your car from a short distance.

Troubleshooting Your 2014 Subaru Crosstrek Key Fob

If your key fob still isn’t working after replacing the battery, there are a few things you can try:

Check the battery orientation. Make sure the positive (+) side is facing up.
Try re-synchronizing your key fob with your car. Your car’s owner’s manual should provide instructions on how to do this.
If the problem persists, there might be a more serious issue with the key fob itself, and you might need to consult a dealership or automotive locksmith.

Conclusion: Keeping Your 2014 Subaru Crosstrek Key Fob Running Smoothly

Replacing your 2014 Subaru Crosstrek key fob battery is a simple and inexpensive task that can save you a lot of hassle. By following the steps outlined in this guide, you can keep your key fob functioning perfectly and avoid any unexpected lockouts. how to open my key fob to replace battery

FAQ

How long does a 2014 Subaru Crosstrek key fob battery last? Typically, a CR2032 battery lasts between 2 and 5 years.
Where can I buy a CR2032 battery? CR2032 batteries are readily available at most stores that sell batteries, as well as online retailers.
Can I use a different type of battery in my 2014 Subaru Crosstrek key fob? No, you should only use a CR2032 battery.
What if my key fob still doesn’t work after replacing the battery? Try re-synchronizing the key fob with your car or consult a dealership.
Is it difficult to replace the battery myself? No, it’s a simple process that most people can do themselves.
How do I know if my key fob battery is low? Signs include reduced range, weaker signal, and dimming indicator lights.
Do I need special tools to replace the battery? No, a small flathead screwdriver or similar tool is usually sufficient. how to open my key fob to replace battery

Common Scenarios & Questions

Scenario: My key fob works intermittently. Question: Could it be a dying battery or something else?
Scenario: I replaced the battery, but my car still doesn’t recognize the key fob. Question: How do I resynchronize the key fob?
Scenario: My key fob is physically damaged. Question: Can it be repaired, or do I need a new one?