Losing or damaging your car key fob can be a stressful experience. If you own a 2015 Ford Edge, you might be wondering about the process and cost of a 2015 Ford Edge Key Fob Replacement. The good news is you can potentially save money by purchasing a key fob online and programming it yourself, provided you meet certain conditions. This guide will walk you through the steps of programming a spare intelligent access key for your 2015 Ford Edge.
Before you rush to buy a 2015 Ford Edge key fob replacement, it’s crucial to ensure you are purchasing the correct one. Look at the numbers on the inside of your existing key fob, specifically in the area where the key is housed. This will help you identify the compatible key fob for your vehicle when browsing online marketplaces like eBay or Amazon. Pay close attention to whether your vehicle has remote start functionality or not, as there are different key fobs for each. Buying the wrong key fob will render it useless for your car.
Once you’ve acquired the correct 2015 Ford Edge key fob replacement, you can proceed with the programming. Keep in mind that this procedure is for programming a spare key. Ford’s system allows you to program a maximum of four intelligent access keys for your 2015 Ford Edge. Critically, to perform this DIY programming, you must have two previously programmed intelligent access keys already in your possession and inside the vehicle, along with your new, un-programmed key fob. If you do not have two working keys, you will likely need to visit a dealership or locksmith for programming services.
Here’s a step-by-step guide to programming your 2015 Ford Edge key fob replacement:
Important Pre-Programming Steps:
- Switch Off Ignition: Ensure your Ford Edge’s ignition is completely switched off before starting the procedure.
- Close All Doors: Make sure all doors, including the trunk, are fully closed and remain closed throughout the entire programming process.
- Time Sensitivity: You must complete all five steps outlined below within 30 seconds of initiating the sequence. Timing is crucial for successful programming. If you make a mistake or exceed the time limit, stop, wait for at least one minute, and then begin again from step one.
- Read Thoroughly: Before you start, read and fully understand all the steps to ensure a smooth and successful programming experience.
Programming Procedure:
-
Access the Backup Tray: Open the lid of your floor console storage compartment. Inside, you will find a backup tray at the bottom.
-
First Programmed Key Insertion: Take one of your two previously programmed intelligent access keys. Hold it with the buttons facing upwards and the key ring towards the rear of the vehicle. Place this key into the backup tray in the console storage.
-
Start/Stop Button – First Sequence: Press and release the Start/Stop button on your Ford Edge. Wait for five seconds, and then press and release the Start/Stop button again. Remove the intelligent access key from the backup tray.
-
Second Programmed Key Insertion: Within 10 seconds of removing the first key, take your second previously programmed intelligent access key and place it into the backup tray. Press and release the Start/Stop button. Wait for five seconds, and then press and release the Start/Stop button again. Remove the second intelligent access key from the backup tray.
-
New Key Fob Programming: Wait five seconds. Then, take your new, un-programmed 2015 Ford Edge key fob replacement and place it into the backup tray. Press and release the Start/Stop button.
Confirmation and Testing:
If the programming is successful, the doors of your 2015 Ford Edge will automatically lock. To confirm, press the unlock button on your newly programmed key fob. Then, test all the remote control functions – lock, unlock, remote start (if applicable), and panic button – to ensure they are working correctly. Finally, attempt to start your vehicle using the new intelligent access key to verify that the programming is fully complete.
Troubleshooting:
If the doors do not lock after step 5, and your key fob does not function, programming was not successful. Wait for one minute and carefully repeat all five steps from the beginning. Due to the time-sensitive nature of the process, you may need to attempt the procedure a few times to achieve success.
Personalization with MyKey (Optional):
After successfully programming your 2015 Ford Edge key fob replacement, you have the option to set it up as a “MyKey”. This feature allows you to program restrictions on the key, such as setting speed limits or volume limits for younger or less experienced drivers who may borrow your car. Refer to your owner’s manual for instructions on setting up and customizing MyKey features.
By following these steps, you can successfully program a 2015 Ford Edge key fob replacement yourself, potentially saving money on dealership programming costs. Always ensure you have the correct key fob and carefully follow the timing and steps outlined for a smooth and successful outcome.
