2016 Ford Explorer Key Fob Battery Size: Everything You Need to Know

Knowing the correct 2016 Ford Explorer key fob battery size is crucial for keeping your key fob functioning smoothly. Whether you’re experiencing a weak signal or your key fob has stopped working altogether, a dead battery is often the culprit. This guide will provide you with all the information you need about the 2016 Explorer key fob battery, from the correct size to replacement instructions.

Identifying the Correct 2016 Ford Explorer Key Fob Battery Size

The 2016 Ford Explorer uses a CR2032 battery for its key fob. This is a common coin cell battery readily available at most stores that sell batteries. It’s a 3-volt lithium battery known for its long lifespan and reliable performance. Make sure you purchase a high-quality CR2032 battery to ensure the longevity and proper function of your key fob. Using a cheaper, lower-quality battery could lead to shorter battery life and potential malfunctions.

How to Replace Your 2016 Ford Explorer Key Fob Battery

Replacing the battery in your 2016 Ford Explorer key fob is a simple process that can be done at home in just a few minutes. You won’t need any specialized tools, just a small flathead screwdriver or a similar tool to pry open the key fob casing.

Here’s a step-by-step guide:

1. Locate the release slot: On the side of your key fob, you’ll find a small release slot.
2. Insert the flathead screwdriver: Carefully insert the flathead screwdriver into the release slot and gently pry open the key fob casing.
3. Separate the two halves: Once the casing is slightly open, you can use your fingers to separate the two halves of the key fob.
4. Remove the old battery: Locate the CR2032 battery and gently pry it out of its compartment using your screwdriver or fingernail. Be careful not to damage the battery contacts.
5. Install the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing upwards.
6. Reassemble the key fob: Align the two halves of the key fob casing and press them together until they snap shut.
7. Test the key fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly.

2016 Ford Explorer Key Fob Battery Replacement Step-by-Step Guide

Why is My Key Fob Not Working Even with a New Battery?

Sometimes, even after replacing the battery, your key fob might still not work. This could be due to several reasons:

• Faulty key fob: The key fob itself might be malfunctioning due to internal damage or wear and tear.
• Programming issues: The key fob might need to be reprogrammed to your vehicle.
• Receiver issues: The receiver in your vehicle might be faulty.

If you’ve replaced the battery and your key fob still isn’t working, it’s best to consult a qualified automotive locksmith or your Ford dealership.

How Long Does a 2016 Ford Explorer Key Fob Battery Last?

The lifespan of a 2016 Ford Explorer key fob battery typically ranges from 3 to 5 years, depending on usage and environmental factors. Signs of a weakening battery include a decreased signal range and intermittent functionality.

Where Can I Buy a CR2032 Battery?

CR2032 batteries are readily available at most retail stores, including electronics stores, pharmacies, and supermarkets. You can also purchase them online.

Preventing Key Fob Battery Drain

While key fob batteries are designed to last for several years, certain habits can accelerate battery drain. Avoid keeping your key fob near electronic devices that emit strong electromagnetic fields, as this can interfere with the key fob’s circuitry and drain the battery. Also, avoid dropping your key fob frequently, as this can damage the battery or its connections.

In conclusion, knowing the correct 2016 Ford Explorer key fob battery size – CR2032 – and how to replace it is essential for any Explorer owner. By following the simple steps outlined in this guide, you can easily keep your key fob functioning optimally.

FAQ

1. What type of battery does a 2016 Ford Explorer key fob use? A CR2032 battery.
2. How do I change the battery in my 2016 Ford Explorer key fob? Use a small flathead screwdriver to pry open the casing, remove the old battery, and insert the new one.
3. Where can I buy a CR2032 battery? Most retail stores that sell batteries, such as electronics stores, pharmacies, and supermarkets.
4. How long does a 2016 Ford Explorer key fob battery last? Typically 3 to 5 years.
5. What if my key fob still doesn’t work after replacing the battery? Consult an automotive locksmith or your Ford dealership.
6. Can I use a different battery size in my 2016 Ford Explorer key fob? No, only a CR2032 battery is recommended.
7. How can I prevent my key fob battery from draining quickly? Avoid keeping it near electronic devices and avoid dropping it.

Need help with your car Key Fob? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.