2016 Ford Fusion Key Fob Battery Type: Everything You Need to Know

Finding the right battery for your 2016 Ford Fusion key fob can be a quick and easy process if you have the correct information. This article provides a comprehensive guide to identifying the correct 2016 Ford Fusion Key Fob Battery Type, how to replace it, and some troubleshooting tips if your key fob isn’t working.

Identifying the Correct 2016 Ford Fusion Key Fob Battery Type

Your 2016 Ford Fusion key fob uses a CR2032 battery. This is a common type of lithium coin cell battery, readily available at most stores that sell batteries. It’s important to use the correct type to ensure proper function and avoid damaging your key fob. Using the wrong battery type can lead to corrosion or even failure of the key fob. Don’t just grab any battery; look specifically for the CR2032 designation.

2016 Ford Fusion Key Fob Battery – CR2032 Type

Where to Buy a CR2032 Battery

CR2032 batteries are readily available. You can find them at:

• Retail stores: Most drugstores, supermarkets, and electronics stores carry CR2032 batteries.
• Online retailers: Amazon, eBay, and other online marketplaces offer a wide selection of CR2032 batteries.
• Auto parts stores: Many auto parts stores also stock CR2032 batteries, often in multi-packs.

How to Change Your 2016 Ford Fusion Key Fob Battery

Changing the battery in your 2016 Ford Fusion key fob is a simple DIY task. You’ll need a small flathead screwdriver or a similar tool to pry open the key fob.

1. Locate the key release button: This is a small button usually on the side of your key fob.
2. Release the emergency key: Press the key release button and slide the emergency key out.
3. Pry open the key fob: Insert the flathead screwdriver into the slot where the emergency key was and gently pry the two halves of the key fob apart.
4. Remove the old battery: Carefully remove the old CR2032 battery. Avoid using excessive force, as you could damage the key fob.
5. Install the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces up.
6. Reassemble the key fob: Snap the two halves of the key fob back together.
7. Test the key fob: Try locking and unlocking your car to ensure the new battery is working.

Step-by-step guide to replacing a 2016 Ford Fusion key fob battery

You might find the process for a 2014 Ford Fusion similar. Learn more about the 2014 ford fusion key fob battery change.

Troubleshooting Your 2016 Ford Fusion Key Fob

Sometimes, even with a new battery, your key fob might not work correctly. Here are some troubleshooting tips:

• Check the battery installation: Ensure the battery is installed correctly, with the positive (+) side facing up.
• Try reprogramming the key fob: In some cases, you may need to reprogram your key fob after replacing the battery. Refer to your owner’s manual for instructions.
• Check for damage: Inspect the key fob for any physical damage, such as cracks or broken buttons.
• Consider a replacement key fob: If all else fails, you may need to replace your key fob.

If your key fob issues extend beyond the battery, it might be beneficial to understand potential issues with other Ford models. For example, the 2014 ford escape key fob not working article provides insights that could be relevant.

Troubleshooting tips for a malfunctioning Ford Fusion key fob

Key Fob Maintenance Tips

• Keep your key fob dry: Avoid exposing your key fob to water or excessive moisture.
• Protect your key fob from impact: Dropping your key fob can damage the internal components. Consider using a protective case.

Programming your key fob can be a complex process. For information on programming a 2016 Ford Taurus key fob, see our guide on 2016 ford taurus key fob programming. While it’s a different model, some principles might apply to your Fusion.

Conclusion

Knowing the correct 2016 Ford Fusion key fob battery type (CR2032) is crucial for maintaining your vehicle’s keyless entry system. Replacing the battery is a simple task you can do yourself, saving you time and money. By following the steps outlined in this article and utilizing the troubleshooting tips, you can ensure your key fob is always working optimally. If you are looking to replace the battery alongside other key fob components, you might find our guide on 2016 ford fusion battery replacement key fob helpful.

FAQ

1. What type of battery does a 2016 Ford Fusion key fob use? CR2032
2. How do I change the battery in my 2016 Ford Fusion key fob? Follow the steps outlined above, using a small flathead screwdriver.
3. Where can I buy a CR2032 battery? Most retail stores, online retailers, and auto parts stores.
4. What should I do if my key fob still doesn’t work after replacing the battery? Check the battery installation, try reprogramming the key fob, check for damage, or consider a replacement.
5. How can I protect my key fob from damage? Keep it dry and avoid dropping it.
6. Can I program my key fob myself? Consult your owner’s manual, as procedures can vary.
7. What other Ford key fob resources are available? Check our guide on the 2016 ford escape key fob pocket.

Need help with your Key Fob? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected], or visit us at 123 Maple Street, New York, USA 10001. We offer 24/7 customer support.