Having trouble with your 2016 Jeep Renegade key fob? A dead battery might be the culprit. Don’t worry, changing it is a simple task you can do right now. In this guide, we’ll walk you through the process step-by-step.
How to Tell if Your Key Fob Battery Needs Replacing
Before you start digging for tools, here are a few signs that scream “dead key fob battery!”:
- Decreased Range: Your Renegade doesn’t respond until you’re practically touching the door.
- Intermittent Functionality: The key fob works sometimes, other times it plays dead.
- Dashboard Warning Light: Some Renegades have a handy indicator light that tells you when the fob battery is low.
What You’ll Need for the Battery Replacement
Good news! You only need two things:
- New Battery: Grab a CR2032 battery – it’s the type used in most 2016 Renegade key fobs.
- A Small Flathead Screwdriver: You probably have one lying around. If not, any hardware store will have one.
2016 Jeep Renegade Key Fob Battery Replacement: Step-By-Step
Let’s get that battery swapped!
- Locate the Release Button: Look on the back of your key fob for a small button or slot.
- Press and Release: Using your fingernail or the flathead screwdriver, gently press the release button.
- Separate the Key Fob: The key fob will split into two halves – one with the buttons and one with the metal key.
- Find the Battery: The CR2032 battery will be sitting inside. Note which side is facing up (+) for the new battery placement.
- Remove the Old Battery: Carefully pry the old battery out using your fingernail or the flathead screwdriver.
- Insert the New Battery: Place the new CR2032 battery in the same orientation as the old one, making sure the positive (+) side is facing up.
- Reassemble the Key Fob: Align the two halves of the key fob and press them together until you hear a click.
- Test It Out: Walk over to your Renegade and try locking and unlocking the doors to make sure the new battery is working.
Troubleshooting Tips
Key fob still acting up? Here’s what to check:
- Battery Installation: Make sure the new battery is properly seated and the positive (+) side is facing up.
- Battery Type: Double-check that you’re using a CR2032 battery.
- Key Fob Programming: In rare cases, you might need to reprogram your key fob after a battery change. Your owner’s manual will have instructions on how to do this.
Still Having Issues?
Sometimes key fob problems go beyond a simple battery change. If you’re still experiencing issues, it’s best to consult your local Jeep dealership or a qualified automotive locksmith for further diagnosis and assistance.
Remember, a well-functioning Key Fob is crucial for a smooth and enjoyable driving experience. So, don’t wait for your Renegade to leave you stranded – check your Key Fob battery today!
Leave a Reply