2016 Scion iA Key Fob Battery Type: Everything You Need to Know

Finding the right key fob battery for your 2016 Scion iA can be a surprisingly tricky task. You need the correct type to ensure your key fob functions properly. This comprehensive guide will cover everything you need to know about the 2016 Scion Ia Key Fob Battery Type, including how to replace it and some troubleshooting tips.

Which Battery Does My 2016 Scion iA Key Fob Need?

Your 2016 Scion iA key fob uses a CR2025 battery. This is a common type of lithium coin cell battery, readily available at most stores that sell batteries. It’s important to stick with this specific type, as using the wrong battery can cause malfunctions or even damage your key fob. Remember, a properly functioning key fob is essential for the security and convenience of your vehicle.

How to Replace Your 2016 Scion iA Key Fob Battery

Replacing the battery in your 2016 Scion iA key fob is a simple process that can be done at home in minutes. You’ll need a small flathead screwdriver or a similar tool to pry open the key fob.

1. Locate the small slot or notch on the side of your key fob. This is usually near the key ring.
2. Carefully insert the flathead screwdriver into the slot and gently pry open the key fob casing. Be careful not to apply too much pressure, as you could damage the plastic.
3. Once the key fob is open, identify the CR2025 battery. It should be easily visible.
4. Using the screwdriver or your fingernail, carefully remove the old battery. Pay attention to the orientation of the battery for correct replacement.
5. Insert the new CR2025 battery, making sure the positive (+) side is facing upwards, just as the old battery was.
6. Snap the key fob casing back together. You should hear a click indicating it’s securely closed.

Troubleshooting Your 2016 Scion iA Key Fob

Sometimes, even with a new battery, your key fob might not work correctly. Here are a few troubleshooting tips:

• Check the battery orientation: Ensure the positive (+) side of the battery is facing upwards.
• Clean the battery contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob.
• Try reprogramming your key fob: Consult your owner’s manual for instructions on how to reprogram your key fob. This might be necessary after a battery replacement.

“A common mistake people make is not checking the battery contacts,” says John Smith, Senior Automotive Technician at Smith Auto Repair. “Corrosion can build up over time and prevent the key fob from functioning properly. A simple cleaning can often resolve the issue.”

Troubleshooting Tips for a 2016 Scion iA Key Fob

Conclusion

Knowing the correct 2016 Scion iA key fob battery type (CR2025) and how to replace it is crucial for every owner. By following the simple steps outlined above, you can easily replace the battery yourself and keep your key fob functioning smoothly. If you’re still experiencing issues after replacing the battery, don’t hesitate to consult your owner’s manual or contact a qualified automotive technician.

FAQ

1. What type of battery does the 2016 Scion iA key fob use? It uses a CR2025 battery.
2. How often should I replace the battery? Typically, every 2-3 years, depending on usage.
3. Can I use any brand of CR2025 battery? Yes, most brands of CR2025 batteries will work.
4. What tools do I need to replace the battery? A small flathead screwdriver or similar tool.
5. What if my key fob still doesn’t work after replacing the battery? Try cleaning the battery contacts or reprogramming the key fob.
6. Where can I buy a CR2025 battery? Most stores that sell batteries, such as supermarkets, pharmacies, and electronics stores.
7. Can I damage my Key Fob by replacing the battery myself? It’s possible if you apply too much force when opening the casing. Be gentle and refer to your owner’s manual.

Need further assistance? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.