2016 Toyota Camry Key Fob Battery: Replacement Guide and Tips

Is your 2016 Toyota Camry key fob not working as reliably as it used to? A common culprit is a low battery. Replacing the battery in your 2016 Toyota Camry key fob is a straightforward process you can easily do yourself, saving time and money compared to dealership service. This guide will walk you through everything you need to know about your 2016 Camry key fob battery, including how to replace it, the correct battery type, and helpful tips to keep your key fob functioning perfectly.

Identifying the Right Battery for Your 2016 Toyota Camry Key Fob

The battery you’ll need for your 2016 Toyota Camry key fob is a CR2016 battery. This is a common 3V lithium coin cell battery, readily available at most drugstores, supermarkets, and online retailers. It’s always a good idea to keep a spare CR2016 battery at home so you’re prepared when your key fob battery eventually needs replacing.

It’s important to note that for the 2016 Toyota Camry, Toyota offered two different key fob options, distinguished by a “G” or “H” marking on the key blade. While the type of remote may vary slightly, both types of 2016 Toyota Camry key fobs use the same CR2016 battery. You do not need to determine whether you have a “G” or “H” key to replace the battery.

Step-by-Step Guide to Replacing Your 2016 Toyota Camry Key Fob Battery

Replacing the battery in your 2016 Toyota Camry key fob is a simple process that should take only a few minutes. Here’s how to do it:

  1. Gather your tools: You will need a small flathead screwdriver (or a similar thin tool) and a new CR2016 battery.

  2. Locate the notch on your key fob: On the side of your key fob, you’ll find a small notch or indentation. This is where you will insert your flathead screwdriver to open the case.

  3. Open the key fob case: Carefully insert the tip of your flathead screwdriver into the notch. Gently twist or pry to separate the two halves of the key fob case. Avoid using excessive force, as you could damage the plastic casing.

  4. Remove the old battery: Once the case is open, you will see the CR2016 battery. Note the orientation of the battery (positive side up or down) before removing it. You can use your fingertip or the edge of the screwdriver to gently pry out the old battery.

  5. Insert the new battery: Place the new CR2016 battery into the battery compartment, ensuring it is oriented the same way as the old battery. The positive (+) side of the battery should typically face upwards, but double-check the markings in the battery compartment if you are unsure.

  6. Close the key fob case: Carefully snap the two halves of the key fob case back together. Ensure they are securely closed. You should hear a click when they are properly aligned and closed.

  7. Test your key fob: Press the buttons on your key fob to ensure it is working correctly. The lock, unlock, trunk release, and panic buttons should all function as expected.

Troubleshooting Common Key Fob Battery Issues

After replacing the battery, your 2016 Toyota Camry key fob should work perfectly. However, if you encounter any issues, here are a few troubleshooting tips:

  • Key fob still not working? Double-check that you installed the new CR2016 battery correctly and that the battery is fresh and not expired. Also, ensure the battery contacts in the key fob are clean and making good contact with the battery.
  • Intermittent issues? Sometimes, even with a new battery, the key fob might be experiencing other issues. If the problem persists, it may be related to the key fob programming or an internal component malfunction. In such cases, consulting a locksmith or Toyota dealership might be necessary.
  • Check for damage: Inspect the key fob for any signs of physical damage, such as cracks or water damage, which could affect its functionality.

Tips to Extend Your Key Fob Battery Life

While CR2016 batteries are designed to last for a reasonable period, here are a few tips to potentially extend the life of your 2016 Toyota Camry Key Fob Battery:

  • Avoid excessive button pressing: Unnecessary button presses can drain the battery faster. Be mindful of accidental button presses when the key fob is in your pocket or bag.
  • Store your key fob properly: Extreme temperatures can affect battery life. Avoid leaving your key fob in direct sunlight or extremely cold environments for extended periods.
  • Consider aftermarket options cautiously: While aftermarket key fobs are available, ensure compatibility and quality. For battery replacement, sticking with a standard CR2016 battery from a reputable brand is recommended.

By following these steps, you can confidently replace your 2016 Toyota Camry key fob battery and ensure your keyless entry system remains reliable. This simple maintenance task can help you avoid the inconvenience of a non-working key fob and keep you on the road.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *