Losing or damaging your key fob can be a real hassle, especially when it comes to your 2017 Chevy Impala. Fortunately, programming a new key fob for your Impala can often be done yourself, saving you time and money. This guide will walk you through the process of 2017 Chevy Impala Key Fob Replacement and programming, ensuring you get back on the road quickly.
Programming a 2017 Chevy Impala Key Fob with Two Recognized Keys
If you still have two working key fobs for your 2017 Chevy Impala, programming a new one is relatively straightforward. Follow these steps:
- Insert your first, already programmed key into the ignition and turn the key to the ON/RUN position.
- Turn the ignition to LOCK/OFF, and remove the key.
- Within five seconds of removing the first key, insert your second, already programmed key into the ignition and turn it to the ON/RUN position.
- Turn the ignition to LOCK/OFF, and remove the second key.
- Immediately, within five seconds, insert the new, unprogrammed key into the ignition and turn it to the ON/RUN position.
At this point, the security light on your dashboard should turn off, indicating that the new key fob has been successfully programmed. If you have additional key fobs to program, repeat steps 1 through 3, and then continue with the new key.
Programming a 2017 Chevy Impala Key Fob Without a Recognized Key
What if you don’t have two working key fobs, or have lost all of them? Don’t worry, you can still program a new 2017 Chevy Impala key fob, although the process is a bit more time-consuming. Here’s how to do it:
- Insert the new, unprogrammed vehicle key into the ignition.
- Turn the ignition to the ON/RUN position. The security light will illuminate.
- Wait for 10 minutes until the security light turns off.
- Turn the ignition to LOCK/OFF.
- Repeat steps 2 through 4 two more times. After the third 10-minute cycle, turn the ignition to the ON/RUN position.
After completing these steps, your new key should be programmed. It’s important to note that this procedure will erase any previously programmed keys, so you will need to reprogram any other key fobs you intend to use with your 2017 Chevy Impala using the “Programming with Two Recognized Keys” method described above.
Important Considerations for Your 2017 Chevy Impala Key Fob Replacement
- Dealer Programming: If you are uncomfortable with these procedures or encounter any difficulties, your Chevy dealer is always equipped to program a new key fob for your 2017 Impala. While it may cost more than doing it yourself, it ensures the job is done correctly.
- Key Limits: Your 2017 Chevy Impala can have up to eight keys or transmitters programmed to it.
- Lost or Stolen Keys: If your key fob was lost or stolen, it’s crucial to reprogram your vehicle. This will ensure the lost or stolen key will no longer work, enhancing your vehicle’s security.
Replacing and programming your 2017 Chevy Impala key fob doesn’t have to be a stressful experience. By following these steps, you can often handle the process yourself. However, when in doubt, consulting your owner’s manual or visiting a certified dealer are always reliable options to ensure a successful 2017 Chevy Impala key fob replacement.
