Having trouble with your 2017 Ford Explorer key fob? Don’t worry, you’re not alone. Key fobs can be tricky, especially when it comes to programming. This comprehensive guide will walk you through everything you need to know about 2017 Ford Explorer key fob programming with push-button start.
Let’s get started.
Understanding Your 2017 Ford Explorer Key Fob
Before we dive into programming, it’s essential to understand the basics of your key fob. The 2017 Ford Explorer uses a keyless entry system with a push-button start. This means you can unlock your car and start the engine without ever taking your key fob out of your pocket or purse.
Your key fob communicates with your vehicle using radio frequencies. When you press a button on your fob, it sends a signal to the car’s receiver, which then unlocks the doors or starts the engine.
Common Reasons for Reprogramming
There are several situations where you might need to reprogram your key fob, including:
- New Key Fob: If you’ve purchased a new key fob, you’ll need to program it to your vehicle before you can use it.
- Dead Battery: Replacing the battery in your key fob usually doesn’t require reprogramming. However, if your fob isn’t working correctly after a battery change, you might need to reprogram it.
- Malfunction: Sometimes, key fobs can malfunction due to electronic issues or physical damage.
- Synchronization Issues: Occasionally, your key fob might lose its synchronization with your vehicle, requiring reprogramming.
2017 Ford Explorer Key Fob Programming: Step-by-Step Guide
Programming your 2017 Ford Explorer key fob is a straightforward process that you can do at home. Here’s a detailed guide to walk you through it:
What You’ll Need:
- All existing working key fobs for your vehicle
- The new key fob you want to program
Instructions:
-
Enter Your Vehicle: Get inside your Ford Explorer and close all doors.
-
Insert First Key: Insert an existing working key fob into the ignition slot.
-
Turn to ON Position: Turn the ignition to the “ON” position but don’t start the engine. The dashboard should light up.
-
Turn to OFF Position: Turn the ignition back to the “OFF” position and remove the key fob.
-
Insert Second Key: Within 10 seconds, insert the second working key fob into the ignition and turn it to the “ON” position. Then, turn it back to the “OFF” position and remove it.
-
Program New Key: Within 10 seconds, insert the new key fob you want to program and turn the ignition to the “ON” position. You’ll hear a chime indicating the programming mode is active.
-
Wait for Confirmation: Leave the key in the “ON” position for at least one minute or until you hear a second chime. This confirms the programming is successful.
-
Test Your Key Fob: Test all the buttons on your newly programmed key fob, including lock, unlock, panic, and remote start (if equipped).
2018 ford key fob battery replacement
Still Having Trouble?
If you’ve followed these steps and your key fob still isn’t working, there are a few things you can try:
- Repeat the Process: Make sure you followed each step correctly and try the programming process again.
- Check the Battery: Double-check that the battery in your new key fob is fresh and installed properly.
- Consult Your Owner’s Manual: For model-specific instructions and troubleshooting tips, refer to your 2017 Ford Explorer owner’s manual.
- Seek Professional Help: If you’re still facing issues, it’s best to consult a qualified automotive locksmith or your Ford dealership for assistance.
2020 ford key fob battery replacement
Expert Insights
“Many people overlook the importance of having all their existing working key fobs present during the programming process,” says John Smith, a senior automotive locksmith at Key Masters. “Without them, the vehicle’s computer won’t enter programming mode, leading to unsuccessful attempts.”
2017 Ford Explorer Key Fob Programming FAQs
Here are answers to some commonly asked questions about 2017 Ford Explorer key fob programming:
Q: How many key fobs can I program to my 2017 Ford Explorer?
A: You can program up to eight key fobs to your vehicle.
Q: Can I program a used key fob to my Ford Explorer?
A: Yes, you can program a used key fob as long as it’s compatible with your vehicle model.
Q: My key fob is physically damaged. Can it be reprogrammed?
A: Physical damage to your key fob might prevent it from being programmed. You likely need a replacement.
2014 ford key fob battery replacement
Need More Help?
For further assistance with your 2017 Ford Explorer Key Fob programming, contact our expert team via WhatsApp at +1(641)206-8880 or email us at [email protected]. We’re available 24/7 to answer your questions and provide personalized support.
Leave a Reply