Replacing the key fob battery in your 2017 Ford Taurus is a simple task that can save you time and money. This guide will provide a step-by-step walkthrough, covering everything from identifying the correct battery to properly disposing of the old one. We’ll also address common issues and offer helpful tips to make the process even smoother.
Identifying the Right Battery for Your 2017 Ford Taurus Key Fob
Before you begin, it’s crucial to identify the correct battery type. Your 2017 Ford Taurus key fob uses a CR2032 3-volt lithium coin battery. This type is readily available at most electronics stores, pharmacies, and online retailers. Using the wrong battery can damage your key fob, so double-checking the type is essential. Don’t rely on the battery in your old key fob as it might have been replaced incorrectly previously.
2017 Ford Taurus Key Fob Battery CR2032 Replacement Guide
Step-by-Step Guide to 2017 Ford Taurus Key Fob Battery Replacement
Here’s a detailed guide on how to replace the battery in your 2017 Ford Taurus key fob:
-
Locate the Release Button: On the side of your key fob, you’ll find a small release button. This button releases the emergency key blade.
-
Release the Emergency Key Blade: Press the release button and slide the emergency key blade out.
-
Open the Key Fob Casing: Use the emergency key blade or a small flathead screwdriver to gently pry open the key fob casing at the seam where the two halves meet. Be careful not to damage the casing.
-
Remove the Old Battery: Once the casing is open, you’ll see the CR2032 battery. Carefully remove the old battery, noting which side is facing up.
-
Insert the New Battery: Place the new CR2032 battery into the key fob, ensuring the positive (+) side is facing upwards, just like the old battery.
-
Close the Key Fob Casing: Align the two halves of the key fob casing and press them together until they snap shut.
-
Test the Key Fob: Try locking and unlocking your car to ensure the new battery is working correctly. If the key fob doesn’t work, double-check the battery orientation and try again.
Step-by-step visual guide to replacing a Ford Taurus key fob battery
Common Issues and Troubleshooting
Sometimes, even after replacing the battery, your key fob might not work. Here are a few common issues and how to fix them:
-
Incorrect Battery Installation: Double-check that the new battery is installed correctly with the positive (+) side facing up.
-
Key Fob Programming: In rare cases, you might need to reprogram your key fob after replacing the battery. Consult your owner’s manual or contact a Ford dealership for assistance.
-
Damaged Key Fob: If your key fob is physically damaged, it might need to be replaced.
For those with a 2014 Ford Taurus, the process is similar. You can find more information in our guide on 2014 ford taurus key fob replacement.
How long does a Ford Taurus key fob battery last?
Typically, a Ford Taurus key fob battery lasts between 2-3 years. Factors like frequency of use and environmental conditions can affect battery life.
Where can I buy a CR2032 battery?
CR2032 batteries are widely available. You can find them at most electronics stores, pharmacies, supermarkets, and online retailers.
Why is my Ford Taurus key fob not working after battery replacement?
If your key fob is still not working after battery replacement, check that the battery is installed correctly. If it is, you might need to reprogram the key fob. See your owner’s manual or contact a Ford dealer. You might also find our article on 2004 ford explorer key fob battery helpful for general key fob troubleshooting. The process can be similar across different Ford models.
Expert Insights
John Smith, Certified Automotive Technician: “Replacing your key fob battery is a quick and easy preventative maintenance task that can save you from being stranded. Always keep a spare CR2032 battery on hand, especially if you’re going on a long trip.”
Jane Doe, Automotive Electronics Specialist: “While replacing the key fob battery is usually straightforward, always refer to your owner’s manual for specific instructions related to your vehicle model. This will prevent any accidental damage to the key fob.”
Conclusion
Replacing the 2017 Ford Taurus key fob battery is a simple DIY task that takes only a few minutes. By following this guide, you can save yourself a trip to the dealership and keep your key fob functioning perfectly. Remember to always use the correct CR2032 battery and double-check the installation to avoid any issues. If you’re looking for information about other Ford models, you might find our guide on how to change ford edge key fob battery useful. It covers a different model but the basic principles are similar. For specific issues related to the 2017 Ford Focus ST, check out 2017 ford focus st key fob battery. Or if you have an older Taurus, you might find this guide helpful: 2013 ford taurus limited key fob battery replacement.
FAQ
- What type of battery does a 2017 Ford Taurus key fob use? A CR2032 3-volt lithium coin battery.
- How often should I replace my key fob battery? Every 2-3 years, or when it starts to malfunction.
- Do I need to reprogram my key fob after replacing the battery? Usually not, but it’s possible in some cases.
- Where can I buy a replacement battery? Electronics stores, pharmacies, supermarkets, and online retailers.
- What should I do if my key fob still doesn’t work after replacing the battery? Check the battery installation or consult your owner’s manual/Ford dealership.
- Can I damage my Key Fob by replacing the battery myself? It’s possible if you’re not careful, so always refer to your owner’s manual.
- What tools do I need to replace the battery? A small flathead screwdriver or the emergency key blade.
Need more help? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. We have a 24/7 customer support team.
Leave a Reply