Is your 2017 Nissan Pathfinder key fob not working like it used to? You press the button to unlock your doors, but nothing happens. It’s a common frustration, and more often than not, the culprit is a dead battery in your key fob. The good news is, replacing the battery in your 2017 Nissan Pathfinder key fob is a straightforward process you can easily do yourself in just a few minutes. No need to panic or rush to the dealership right away!
This guide will walk you through each step to quickly and efficiently replace your 2017 Nissan Pathfinder Key Fob Battery, saving you time and potentially money. Let’s get your key fob working again.
What Battery Does the 2017 Nissan Pathfinder Key Fob Need?
Before you start, it’s important to know the right battery for your 2017 Nissan Pathfinder key fob. You’ll need a CR2032 3V battery. This type of battery is widely available at most drugstores, grocery stores, hardware stores, and online retailers. It’s a good idea to keep a few of these on hand, as they power many household devices. For this replacement, a single CR2032 battery is all you need.
Step-by-Step Guide to Replacing Your 2017 Nissan Pathfinder Key Fob Battery
Replacing the battery is a delicate process, as you’ll be handling small electronic components. To ensure you don’t accidentally damage your key fob, it’s recommended to use gloves, like latex or a non-latex alternative. You’ll also need a small flathead screwdriver.
-
Locate the Release for the Emergency Key: Flip your 2017 Nissan Pathfinder key fob to the back. You’ll see a small slider or button designed to release the emergency mechanical key.
-
Remove the Emergency Key: Slide the release and gently pull out the emergency key from the key fob. Set the key aside in a safe place.
-
Find the Notch to Open the Fob: Look at the top of the key fob, where the key ring attaches. You should see a small notch or seam running along the edge where the front and back halves of the fob meet.
-
Insert the Flathead Screwdriver: Carefully insert the tip of your small flathead screwdriver into this notch.
-
Gently Pry Open the Key Fob: Twist the screwdriver gently. This should start to separate the two halves of the key fob. Don’t force it; apply steady, gentle pressure until the casing begins to split. You might hear a soft clicking sound as the halves separate.
-
Locate the Old Battery: Once the key fob is open, you’ll see the internal components. The dead CR2032 battery will be visible, usually held in place by small clips.
-
Remove the Old Battery: Use the flathead screwdriver to carefully pry the old battery out of its housing. Be gentle to avoid damaging the surrounding electronics.
-
Insert the New Battery: Take your new CR2032 battery and insert it into the battery compartment. Make sure the “+” (positive) side of the battery is facing down when you place it in the fob. There’s usually a small indicator in the battery compartment to show the correct polarity.
-
Click the New Battery into Place: Press down on the new battery until it clicks securely into its position. Ensure it’s firmly seated.
-
Reassemble the Key Fob: Carefully align the two halves of the key fob casing back together.
-
Snap the Fob Halves Together: Press the front and back halves of the key fob firmly together until they snap securely back into place. You should hear a click as they close completely.
-
Replace the Emergency Key: Slide the emergency key back into its slot until it clicks and locks into place.
-
Test Your Key Fob: Press the buttons on your key fob to test if it’s working. Your 2017 Nissan Pathfinder should respond, locking or unlocking the doors as expected.
Nissan key fob back with slider for emergency key
When to Consider Professional Help
While changing your 2017 Nissan Pathfinder key fob battery is typically a simple DIY task, there might be situations where you prefer professional assistance. If you’re uncomfortable working with small electronics, or if you encounter any difficulties during the process, don’t hesitate to seek help.
Your local Nissan dealership or a qualified automotive locksmith can easily replace your key fob battery. They can also diagnose any other potential issues if battery replacement doesn’t solve the problem. Consider scheduling a service appointment if you’d rather have a professional handle it, or if you suspect a more complex issue with your key fob.
Conclusion
Replacing the battery in your 2017 Nissan Pathfinder key fob is a quick and easy fix that can save you from the inconvenience of a non-working remote. By following these simple steps, you can get your key fob back in action and regain full access to your vehicle’s remote functions. With a fresh CR2032 battery, your 2017 Nissan Pathfinder key fob should be ready to serve you reliably once again.
