Replacing the battery in your 2017 Tacoma key fob is a quick and easy process that can save you time and money. This guide will walk you through each step, ensuring you can get back on the road with a fully functioning key fob in no time.
Why Replace Your 2017 Tacoma Key Fob Battery?
A dying key fob battery can manifest in several ways. Perhaps you’re experiencing decreased range, meaning you need to be much closer to your truck to lock or unlock it. Maybe the buttons require multiple presses before they register. Or, in the worst-case scenario, your key fob might stop working altogether, leaving you stranded. Regular 2017 Tacoma Key Fob Battery Replacement can prevent these inconveniences.
Signs You Need a New Key Fob Battery
- Reduced key fob range
- Intermittent key fob function
- Key fob unresponsive
These symptoms can indicate a low battery, and addressing the issue promptly will save you future headaches.
2017 Tacoma key fob with reduced range due to low battery
How to Replace the 2017 Tacoma Key Fob Battery: A Step-by-Step Guide
The 2017 Tacoma key fob battery replacement process is straightforward. Here’s a detailed guide to help you:
- Locate the small slot on the side of your key fob. This slot is designed to help you separate the two halves of the key fob casing.
- Insert a small flathead screwdriver or a key into the slot. Gently twist to pry open the key fob. Be careful not to damage the plastic.
- Identify the old battery. It’s typically a CR2032 battery.
- Carefully remove the old battery. You can use the screwdriver or your fingernail to pry it loose.
- Insert the new CR2032 battery. Make sure the positive (+) side is facing upwards.
- Snap the two halves of the key fob back together. Ensure they fit snugly.
Step-by-step guide to replace the battery in a 2017 Tacoma key fob
Where to Buy a 2017 Tacoma Key Fob Battery
CR2032 batteries are readily available. You can purchase them from:
- Auto parts stores: Most auto parts stores stock CR2032 batteries.
- Electronics stores: Many electronics retailers also carry these batteries.
- Online retailers: Websites like Amazon offer a wide selection of CR2032 batteries.
Choosing the right battery is crucial for optimal performance. Make sure you buy a CR2032 battery from a reputable seller.
What Type of Battery Does a 2017 Tacoma Key Fob Use?
A 2017 Tacoma key fob uses a CR2032 battery. This is a common type of lithium coin battery.
Key Fob Programming for Your 2017 Tacoma
In most cases, simply replacing the battery won’t require you to reprogram your key fob. Your Tacoma should recognize the fob automatically. However, if your key fob still doesn’t work after replacing the battery, consult your owner’s manual or a Toyota dealership for instructions on how to reprogram it.
Conclusion
2017 Tacoma key fob battery replacement is a simple DIY task that can save you the hassle of a malfunctioning key fob. By following this guide, you can easily replace the battery and keep your Tacoma’s key fob working perfectly.
FAQ
- How long does a 2017 Tacoma key fob battery last? Typically, 2-3 years.
- What are the signs of a dying key fob battery? Reduced range, intermittent function, and unresponsiveness.
- Where can I buy a replacement battery? Auto parts stores, electronics stores, and online retailers.
- What type of battery does the 2017 Tacoma key fob use? A CR2032 battery.
- Do I need to reprogram my key fob after replacing the battery? Usually not.
Looking for other helpful guides? Check out our articles on Key Fob programming and troubleshooting common Key Fob problems.
Need assistance? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer support team is available 24/7.
Leave a Reply