Are you struggling to lock or unlock your 2019 Audi? Is the low battery warning light illuminated on your dashboard? It might be time for a 2019 Audi Key Fob Battery Replacement. Don’t worry, replacing the battery in your Audi key fob is a straightforward process you can often do yourself. As experts at keyfobx.com, we’ve created this guide to help you through each step, ensuring you can get back on the road with a fully functioning key fob.
While Audi key fobs are designed to be durable, the battery life is finite. Like any electronic device, the battery will eventually need replacing. Knowing how to perform this simple maintenance task yourself can save you time and money. This guide will cover the most common types of key fobs used in 2019 Audi models, providing clear instructions for each.
Identifying Your 2019 Audi Key Fob Type
For 2019 Audi vehicles, you’ll likely encounter two main types of key fobs: the newer style flip key and the smart keyless entry remote. The exact steps for battery replacement differ slightly between these types, so it’s important to identify which one you have.
Newer Style Audi Flip Key Fob: This key fob features a retractable metal key blade that flips out when you press a button.
Audi Smart Keyless Entry Remote: This is a more advanced key fob that allows for keyless entry and start. It typically has a removable physical key blade for emergency access.
Once you’ve identified your key fob type, follow the corresponding instructions below.
Step-by-Step Guide: 2019 Audi Flip Key Fob Battery Replacement
If your 2019 Audi uses the flip key style fob, follow these instructions to replace the battery:
- Acquire the Correct Battery: You’ll need a CR2032 battery. This is a common type of button cell battery readily available at most drugstores, supermarkets, and online retailers.
- Flip Out the Metal Key Blade: Press the key release button to flip out the metal key blade.
- Locate the Notch: With the metal key flipped out, look for a small notch inside the key compartment.
- Open the Battery Casing: Carefully insert a small flathead screwdriver or a thin pry tool into the notch. Gently twist the screwdriver to pop open the battery cover. You might also be able to use the metal key blade itself for this step, inserting it into the notch for leverage.
- Remove the Battery Cover: Once popped open, gently pry the cover away from the back of the key fob, near the keyring loop.
- Remove the Old Battery: Take out the old CR2032 battery. Note the orientation of the battery – typically the positive (+) side faces up.
- Insert the New Battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up, matching the original battery’s orientation.
- Reattach the Battery Cover: Carefully align the plastic notches of the cover with the corresponding slots on the key fob. Gently press the cover back into place until it snaps shut securely.
- Test Your Key Fob: Try locking and unlocking your Audi to ensure the new battery is working correctly.
Step-by-Step Guide: 2019 Audi Smart Keyless Entry Remote Battery Replacement
For 2019 Audi models equipped with the smart keyless entry remote, use these steps:
- Obtain a CR2032 Battery: Again, you’ll need a CR2032 battery.
- Remove the Metal Key Blade: Locate the release button or latch on your smart key fob. Press or slide it to release and remove the metal key blade.
- Find the Notch: Look in the area where you removed the metal key blade. You should see a small notch or slot.
- Pry Open the Fob Shell: Insert a flathead screwdriver into the notch at an angle, pointing towards the center of the key fob. Carefully rotate the screwdriver to gently pry open the key fob shell.
- Separate the Shell: Once you’ve created a small opening, carefully separate the two halves of the key fob shell.
- Replace the Battery: Remove the old CR2032 battery and replace it with a new one, ensuring the positive (+) side is facing up.
- Snap the Shell Back Together: Align the two halves of the key fob shell and gently press them together until they snap securely back into place.
- Reinsert the Metal Key Blade: Slide the metal key blade back into its slot until it clicks into position.
- Test the Key Fob: Test the lock, unlock, and remote start functions of your key fob to confirm the battery replacement was successful.
Reinitializing Your 2019 Audi Key Fob (If Necessary)
In most cases, your 2019 Audi key fob should work immediately after a battery replacement. However, if you find that your car doesn’t recognize the key fob, you might need to reinitialize it. Here’s a simple reinitialization procedure you can try:
- Manual Door Lock: Insert the key into the driver’s side door lock.
- Manual Lock and Unlock: Manually unlock and then lock the door using the key.
- Unlock Button Press: Remove the key from the door and press the “unlock” button on your key fob.
This process often resynchronizes the key fob with your Audi’s system. If you continue to experience issues, it’s best to consult with an Audi service professional.
2019 Audi Key Fob Battery Replacement Cost
The cost of a replacement CR2032 battery for your 2019 Audi key fob is minimal. You can typically purchase these batteries for around $5 to $10, depending on the brand and retailer. If you choose to have an Audi service center, like Audi Fletcher Jones, replace the battery for you, there will be an additional service charge. However, replacing the battery yourself is a cost-effective solution for most Audi owners.
Need Further Assistance? Contact Audi Fletcher Jones
Replacing the battery in your 2019 Audi key fob is usually a simple DIY task. However, if you encounter any difficulties or prefer professional assistance, the team at Audi Fletcher Jones is here to help. Our expert service technicians can quickly and efficiently handle your key fob battery replacement and address any other Audi service needs you may have. Don’t hesitate to schedule a service appointment or contact our parts center for battery inquiries. We are dedicated to keeping your Audi running smoothly and conveniently.
