Is your 2019 Jeep Renegade key fob starting to act up? A common culprit is a low battery. Before you rush to the dealership or worry about expensive replacements, you might be relieved to know that changing the battery in your key fob is a simple task you can easily do yourself. This guide will walk you through the steps to replace your 2019 Jeep Renegade key fob battery, saving you time and money.
Recognizing the signs of a weak key fob battery is the first step. You might notice that you need to be closer to your Renegade for the remote to work, or that pressing the buttons requires more force than usual. Sometimes, the vehicle might display a warning message on the dashboard indicating a low key fob battery. These are all telltale signs that it’s time for a replacement.
Replacing the battery in your 2019 Jeep Renegade key fob is straightforward and requires minimal tools. You’ll typically need a small flathead screwdriver or a similar tool to gently pry open the key fob casing. The battery you’ll need is usually a CR2032 button cell battery, which is widely available at drugstores, supermarkets, and online retailers.
Here’s a step-by-step guide to replacing your 2019 Jeep Renegade key fob battery:
-
Locate the notch: On the back of your key fob, you’ll find a small notch or indentation. This is where you’ll insert your flathead screwdriver.
-
Carefully pry open the case: Gently insert the tip of your screwdriver into the notch and twist to separate the two halves of the key fob casing. Be careful not to apply too much force, as you could damage the plastic.
-
Identify the battery: Once open, you’ll see the battery compartment. Take note of the battery’s orientation (+ side up or down) before removing it.
-
Remove the old battery: Carefully remove the old CR2032 battery. You might be able to pry it out with your fingernail or the screwdriver if needed.
-
Insert the new battery: Place the new CR2032 battery into the compartment, ensuring it’s in the correct orientation as the old one.
-
Close the key fob: Snap the two halves of the key fob casing back together until they are securely closed. You should hear a click.
-
Test your key fob: Try using your key fob to lock and unlock your 2019 Jeep Renegade to ensure the new battery is working correctly.
By following these simple steps, you can easily replace the battery in your 2019 Jeep Renegade key fob and restore its functionality. This DIY approach not only saves you money but also gives you the satisfaction of handling a minor car maintenance task yourself. Remember to properly dispose of the old battery according to local regulations. Replacing your 2019 Jeep Renegade key fob battery is a quick and easy fix to keep your remote working reliably.
