Replacing the battery in your 2019 Toyota 4Runner key fob is a quick and easy process that can save you time and money. This guide will walk you through everything you need to know, from identifying the correct 2019 Toyota 4runner Key Fob Battery to completing the replacement.
Knowing how to change your key fob battery is essential for any 2019 Toyota 4Runner owner. A dead battery can leave you stranded, unable to unlock your car or start the engine. Luckily, replacing the 2019 toyota 4Runner key fob battery is a simple DIY task that requires minimal tools and only a few minutes of your time. You can find more information about the 2019 toyota 4runner key fob battery type.
Identifying the Correct Battery
The 2019 Toyota 4Runner key fob uses a CR2032 battery, a common type readily available at most stores. This small, circular battery is known for its long lifespan and reliability.
What type of battery does a 2019 Toyota 4Runner key fob use?
A 2019 Toyota 4Runner key fob uses a CR2032 battery.
Gathering Your Tools
Before you begin, gather the following tools:
- A small flathead screwdriver or a key
- A new CR2032 battery
What tools do I need to replace the battery?
You’ll need a small flathead screwdriver or a key, and a new CR2032 battery.
Step-by-Step Battery Replacement Instructions
- Locate the release button: On the side of your key fob, you’ll find a small release button. This button releases the emergency key.
- Release the emergency key: Press the release button and slide the emergency key out of the fob.
- Open the key fob: Insert the flathead screwdriver or key into the slot vacated by the emergency key. Gently twist to pry open the two halves of the key fob. Be careful not to damage the plastic. For a visual aid, see our guide on toyota 4runner key fob.
- Remove the old battery: Once the fob is open, you’ll see the CR2032 battery. Use your screwdriver or fingernail to carefully pry it out of its compartment.
- Install the new battery: Insert the new CR2032 battery, positive side up, into the compartment. Make sure it sits securely. You might also be interested in protecting your key fob with a key fob cover toyota 4runner.
- Close the key fob: Align the two halves of the key fob and press them together until they snap shut.
- Reinsert the emergency key: Slide the emergency key back into its slot.
- Test the key fob: Try locking and unlocking your car, as well as starting the engine, to ensure the new battery is working correctly. If your rear window isn’t working properly, you can check out our guide on 2019 toyota 4runner key fob rear window.
Troubleshooting
If your key fob still doesn’t work after replacing the battery, there might be other issues. You can try reprogramming the key fob or consult a professional. If you have another vehicle like a Corolla, you can check our guide on 2006 toyota corolla ce key fob programming.
New CR2032 Battery Installed in a Key Fob
Conclusion
Replacing the 2019 toyota 4Runner key fob battery is a simple and inexpensive task that can be done in minutes. By following the steps outlined above, you can ensure your key fob remains functional and avoid any unexpected lockouts.
FAQ
- How often should I replace my key fob battery? Typically, a key fob battery lasts between 2-3 years.
- Where can I buy a CR2032 battery? CR2032 batteries are readily available at most electronics stores, pharmacies, and online retailers.
- Can I damage my key fob by replacing the battery myself? As long as you follow the instructions carefully and use the correct tools, you shouldn’t damage your key fob.
- What if my key fob still doesn’t work after replacing the battery? Try reprogramming the key fob or consult a professional.
- Is it cheaper to replace the battery myself or have it done professionally? Replacing the battery yourself is significantly cheaper than having it done professionally.
- What are some signs that my key fob battery is dying? A weak signal, needing to be closer to the car to lock/unlock, or the key fob not working intermittently are common signs.
- Can I use a different type of battery in my Key Fob? No, it’s crucial to use the correct battery type (CR2032) for your 2019 Toyota 4Runner Key Fob.
For further assistance, please contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.
Leave a Reply