If you’re noticing your 2019 Toyota Avalon key fob acting up – locking and unlocking doors intermittently or having trouble starting the engine – it might be time for a battery change. This is a common issue and thankfully, a pretty simple DIY fix. Don’t worry about a trip to the dealership, we’ll walk you through the entire process.
What You Need to Replace Your 2019 Toyota Avalon Key Fob Battery
Before you begin, gather the following:
- A new CR2032 battery: This is the standard battery for most Toyota key fobs.
- A small flathead screwdriver: This is needed to open the key fob.
How to Change the Battery in Your 2019 Toyota Avalon Key Fob: A Step-by-Step Guide
Step 1: Find the Release Button
Examine your key fob. You’ll see a small button on the back, usually near the top. This is the release button.
Step 2: Release the Mechanical Key
Push the release button and firmly slide the mechanical key out of the fob.
Step 3: Open the Fob
Use your flathead screwdriver to gently pry open the key fob at the seam. Be careful not to damage the plastic.
Step 4: Locate and Remove the Old Battery
Inside you’ll find the old CR2032 battery. Carefully remove it, noting which side is facing up (+ or -).
Step 5: Install the New Battery
Place the new battery in the fob, making sure it’s facing the same direction as the old battery.
Step 6: Close the Fob
Align the two halves of the fob and press them firmly together until you hear a click.
Step 7: Reinsert the Mechanical Key
Slide the mechanical key back into the fob until it locks in place.
Step 8: Test Your Key Fob
Try locking and unlocking your car doors and starting the engine to make sure the new battery works properly.
Still Having Problems?
If you’ve replaced the battery and your 2019 Toyota Avalon key fob still isn’t working, it’s possible there’s a different issue at play. Here are a few things to consider:
- Key Fob Programming: In some cases, a new battery might require reprogramming to sync with your car. You can usually find instructions on how to do this in your owner’s manual or online.
- Faulty Key Fob: There’s a chance your key fob itself might be malfunctioning, requiring replacement.
- Receiver Issues: The problem could lie with your vehicle’s keyless entry receiver, which is responsible for communicating with the fob. This would require professional diagnosis and repair.
Expert Insight:
“While changing your key fob battery is a simple DIY task, it’s important to ensure you’re purchasing the correct battery type and following the proper steps to avoid damaging your fob,” advises John Smith, Senior Automotive Technician at CarDiagTech Workshop. “If you’re unsure about any part of the process, it’s always best to consult a professional.”
Changing the battery in your 2019 Toyota Avalon key fob is a quick and easy way to keep your keyless entry system working smoothly. By following these simple steps, you can save yourself a trip to the dealership and get back on the road in no time.
Need additional help with your car Key Fob? Contact our team of experts 24/7 via WhatsApp: +1(641)206-8880, Email: [email protected]. We’re here to assist you!
Leave a Reply