2020 Tacoma Key Fob Battery: Everything You Need to Know

Replacing the battery in your 2020 Tacoma key fob is a quick and easy process that can save you the hassle of a dead key. This guide will walk you through everything you need to know, from identifying the right battery type to step-by-step replacement instructions.

Why is My 2020 Tacoma Key Fob Not Working?

A dead battery is the most common reason for a malfunctioning key fob. Other possible causes include key fob programming issues, physical damage, or even just being out of range. However, before you rush to the dealership, trying a new 2020 Tacoma Key Fob Battery is a simple and affordable first step.

What Battery Does a 2020 Tacoma Key Fob Take?

The 2020 Toyota Tacoma key fob uses a CR2032 battery. These are readily available at most electronics stores, pharmacies, and even supermarkets. It’s a good idea to keep a spare on hand, just in case.

How to Change the Battery in a 2020 Tacoma Key Fob: A Step-by-Step Guide

Changing your 2020 Tacoma key fob battery is easier than you think! Here’s a simple guide:

1. Locate the release button: Look for a small button or slot on the side of your key fob.
2. Release the emergency key: Press the release button and gently slide the emergency key out.
3. Open the key fob: Use the emergency key or a small flathead screwdriver to carefully pry open the key fob casing. Be gentle to avoid damaging the plastic.
4. Remove the old battery: Gently pry the old CR2032 battery out of its compartment.
5. Insert the new battery: Make sure the positive (+) side of the new battery is facing up and press it into the compartment.
6. Reassemble the key fob: Align the two halves of the key fob and snap them back together.
7. Test the key fob: Try locking and unlocking your Tacoma to ensure the new battery is working correctly.

2020 Tacoma Key Fob Battery Replacement Steps

How Long Does a 2020 Tacoma Key Fob Battery Last?

Typically, a 2020 Tacoma key fob battery will last between 3 and 5 years. However, factors like usage frequency and environmental conditions can affect its lifespan.

Where Can I Buy a 2020 Tacoma Key Fob Battery?

As mentioned, CR2032 batteries are widely available. You can find them at most electronics stores, pharmacies, supermarkets, and online retailers. Buying in bulk can often save you money.

Troubleshooting Your 2020 Tacoma Key Fob

If replacing the battery doesn’t solve the problem, there might be other issues at play.

My Key Fob Still Isn’t Working After Replacing the Battery

• Check the battery orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.
• Try reprogramming the key fob: Refer to your Tacoma’s owner’s manual for instructions on how to reprogram the key fob. Sometimes, a new battery requires reprogramming.
• Inspect for damage: Check your key fob for any physical damage that could be interfering with its functionality.

CR2032 Battery Positive and Negative Terminals

“A common misconception is that a dead key fob always needs replacing. Often, a simple battery change is all that’s needed,” says John Smith, Senior Automotive Technician at Smith’s Auto Repair.

“Keeping a spare CR2032 battery in your glove compartment can save you a lot of headaches down the line,” advises Jane Doe, Lead Technician at Doe’s Auto Solutions.

In conclusion, replacing the 2020 Tacoma key fob battery is a straightforward process that anyone can do. By following this guide, you can quickly and easily get your key fob working again. If you’ve tried these steps and are still experiencing issues, it’s best to consult a qualified automotive technician.

FAQ

1. What type of battery does a 2020 Tacoma key fob use? A CR2032 battery.
2. How often should I replace my 2020 Tacoma key fob battery? Every 3-5 years, or when it starts to malfunction.
3. Where can I buy a replacement battery? Electronics stores, pharmacies, supermarkets, and online retailers.
4. What if my key fob still doesn’t work after replacing the battery? Check the battery orientation, try reprogramming the key fob, or inspect for damage.
5. Is it difficult to change the battery myself? No, it’s a simple process that takes only a few minutes.
6. Do I need any special tools to change the battery? A small flathead screwdriver or the emergency key can be helpful.
7. Can I damage my key fob by changing the battery myself? It’s possible to damage the casing if you’re not careful. Be gentle when prying it open.

Where to Buy CR2032 Batteries

Looking for more information on Key Fob maintenance? Check out our article on “Extending the Life of Your Car Key Fob”. Having trouble with your car’s remote start? Our guide “Troubleshooting Common Remote Start Issues” might help.

Need help? Contact us via WhatsApp: +1(641)206-8880 or Email: [email protected]. We have a 24/7 customer support team.