Is your 2022 Subaru Crosstrek key fob acting up? Don’t get stranded! Often, the culprit is simply a dead battery. As a Subaru repair expert at keyfobx.com, I’m here to tell you that replacing your 2022 Subaru Crosstrek Key Fob Battery is a straightforward task you can easily handle yourself. Forget the stress and potential dealership fees – this guide will walk you through each step to get you back on the road quickly.
Identifying Your 2022 Subaru Crosstrek Key Fob and Battery Type
For the 2022 Subaru Crosstrek, you’ll primarily encounter the bulging rectangle-shaped key fob. This modern design is user-friendly and requires a common and readily available CR2032 battery.
To be absolutely sure and for future reference, always check your owner’s manual. It’s the definitive guide for your specific Subaru model and will confirm your key fob type and the correct battery.
Knowing your key fob type upfront will ensure you have the right replacement battery ready, making the entire process smooth and efficient.
Step-by-Step Guide: 2022 Subaru Crosstrek Key Fob Battery Replacement (Bulging Rectangle Shape)
Replacing the battery in your 2022 Subaru Crosstrek key fob is a breeze. Here’s how to do it:
-
Locate and Remove the Emergency Key: On the back of your key fob, find a small silver tab. Press and hold this tab to release and slide out the metal emergency key. Set the key aside in a safe place.
-
Pry Open the Key Fob: Carefully inspect the seam running around the key fob. This is where you’ll gently pry it open. You can use your fingernail or a flathead screwdriver. If using a screwdriver, insert it into the seam and gently twist to separate the two halves of the fob. Be patient and avoid applying excessive force to prevent damage to the casing.
-
Access the Battery: Once open, you’ll see the internal components. The flat, round CR2032 key fob battery will be visible, either on top or underneath the transmitter circuit board depending on how the fob opens.
-
Remove and Replace the Old Battery: Gently release the old battery. In some cases, there might be a small clip holding it in place, which you can easily maneuver with your fingertip or the tip of a screwdriver. Take note of the battery orientation – specifically which side is facing up (+ side). Now, take your new CR2032 battery and pop it into place, ensuring the correct side (the + side) is facing upwards, matching the orientation of the old battery. Minimize touching the flat surfaces of the new battery to avoid transferring oils from your fingers, which can potentially shorten battery life.
-
Reassemble the Key Fob: Carefully align the two halves of the key fob and press them firmly back together until they snap securely. You should hear a click, indicating they are properly closed.
-
Re-insert the Emergency Key: Slide the metal emergency key back into its slot until it clicks into place.
Your 2022 Subaru Crosstrek key fob should now be powered up with a fresh battery! Test it out to ensure it’s working correctly, locking and unlocking your doors and starting your vehicle remotely (if applicable).
What About Other Subaru Key Fob Types?
While the bulging rectangle fob is common for the 2022 Crosstrek, Subaru has used other key fob designs in the past. These include:
- Teardrop Shape: An older design that uses a 2025 battery. The replacement process is very similar to the bulging rectangle fob, just without the initial emergency key removal step.
- Exposed Metal Key with Buttons: An even older style that features a visible metal key and requires a CR1620 battery. This fob has an additional internal casing that needs to be opened to access the battery.
While the battery replacement steps are fundamentally similar across these types, always refer to your owner’s manual for the most accurate information and battery type for your specific Subaru key fob.
Key Fob Programming: Is it Necessary After Battery Replacement?
Generally, no, you do not need to reprogram your 2022 Subaru Crosstrek key fob after simply replacing the battery. The key fob’s programming is stored separately and is not erased by a battery change.
However, if you are experiencing issues even after replacing the battery, or if you needed to replace the entire key fob, then programming might be required.
For newer Subaru models like the 2022 Crosstrek, key fob programming often needs to be done at a dealership for security reasons. While the original article mentions a DIY programming method, this is typically for older Subaru models.
If you suspect your 2022 Subaru Crosstrek key fob needs programming, it’s best to contact your local Subaru dealership. They have the specialized equipment and expertise to handle key fob programming efficiently.
Rely on Keyfobx.com for Your Subaru Key Fob Needs
Replacing your 2022 Subaru Crosstrek key fob battery is a simple DIY task that can save you time and money. By following these steps, you can confidently get your key fob working again.
However, if you encounter any issues or prefer professional assistance, remember that dealerships like Subaru North Orlando are available to help with battery replacement, key fob programming, and new key fob orders.
For more helpful guides and information on key fobs and car maintenance, visit keyfobx.com – your trusted resource for automotive expertise!
