2016 Cherokee Key Fob Battery: Everything You Need to Know

Replacing the battery in your 2016 Jeep Cherokee key fob is a quick and easy process, but it can be a real headache if you don’t know what you’re doing. This guide will cover everything you need to know about your 2016 Cherokee Key Fob Battery, from identifying the correct battery type to step-by-step replacement instructions and troubleshooting tips.

You’re driving home after a long day, ready to relax, but your 2016 Cherokee key fob refuses to unlock the doors. Could it be a dead battery? Chances are, that’s the culprit. Don’t worry, it happens to the best of us! Let’s dive in and get your key fob working again. For those interested in replacing the battery in a Grand Cherokee, check out our guide on 2016 Grand Cherokee key fob battery replacement.

Understanding Your 2016 Cherokee Key Fob

Before we get our hands dirty, it’s important to understand the type of key fob your 2016 Cherokee uses. This information is crucial for purchasing the correct replacement battery. The 2016 Cherokee typically uses a CR2032 battery, a common type readily available at most stores.

Why Does My Key Fob Battery Die?

Like any battery, your key fob battery has a limited lifespan. Factors like frequency of use, temperature, and even humidity can affect its longevity. Typically, a 2016 cherokee key fob battery lasts between 3-4 years. However, if you notice reduced range or intermittent functionality, it might be time for a change.

How to Replace Your 2016 Cherokee Key Fob Battery: A Step-by-Step Guide

Replacing the battery is easier than you think! Here’s a step-by-step guide to get you through the process:

Gather Your Supplies: You’ll need a new CR2032 battery, a small flat-head screwdriver or a key, and optionally, a small container to hold the screws.
Locate the Key Release: On the side of your key fob, you’ll find a small button or switch. Press it to release the emergency key blade.
Open the Key Fob: Use the emergency key blade or a small flat-head screwdriver to gently pry open the key fob casing. Be careful not to damage the plastic.
Remove the Old Battery: Once open, you’ll see the CR2032 battery. Gently pry it out using your screwdriver or key.
Install the New Battery: Insert the new CR2032 battery, making sure the positive (+) side faces upwards.
Reassemble the Key Fob: Snap the two halves of the key fob back together.
Test the Key Fob: Try locking and unlocking your Cherokee to ensure the new battery is working correctly.

“A common mistake people make is inserting the battery incorrectly,” warns John Smith, Senior Automotive Technician at Smith Auto Repair. “Always double-check the polarity before closing the fob.”

Troubleshooting Your 2016 Cherokee Key Fob

Sometimes, replacing the battery isn’t the only solution. If your key fob still isn’t working after a battery replacement, here are a few things you can try:

Check for Physical Damage: Examine the key fob for any cracks or broken buttons. If there’s damage, you might need a new key fob. If you’re looking for a new Trailhawk key fob specifically, our guide on the 2016 Jeep Cherokee Trailhawk key fob may be helpful.
Try Reprogramming: In some cases, the key fob might need to be reprogrammed. Check your owner’s manual or consult a dealership for instructions. You can also find helpful information on our guide about Jeep Cherokee key fob programming.
Consider Other Issues: If the key fob and battery are fine, the problem might lie with your vehicle’s receiver. If you’ve already tried replacing the battery and are unsure where to go next, you may find our guide on where to get key fob battery replaced helpful.

“Another common issue is simply having the wrong battery type,” adds Emily Davis, Certified Automotive Electrician. “Double-checking the required battery for your specific model is crucial.”

Testing the Jeep Cherokee Key Fob after Battery Replacement

Conclusion

Replacing your 2016 cherokee key fob battery is a simple task that can save you time and money. By following the steps outlined above, you can get your key fob back in working order in minutes. Remember to always double-check the battery type and polarity before closing the fob.

FAQs

What type of battery does a 2016 Jeep Cherokee key fob use? A CR2032 battery.
How long does a 2016 Cherokee key fob battery last? Typically 3-4 years.
What do I do if my key fob still doesn’t work after replacing the battery? Check for physical damage, try reprogramming, or consider other vehicle issues.
Where can I buy a CR2032 battery? Most stores that sell batteries carry CR2032s.
Can I replace the 2016 cherokee key fob battery myself? Yes, it’s a simple DIY task.

Need help with your key fob or have other car key related questions? Check out these related articles:

2016 Grand Cherokee key fob battery replacement
Jeep Cherokee key fob programming
2016 Jeep Cherokee Trailhawk Key Fob

For immediate assistance, contact us via WhatsApp: +1(641)206-8880, or Email: [email protected]. Our customer support team is available 24/7.