How to Replace Battery in 2016 Jeep Cherokee Key Fob

Replacing the battery in your 2016 Jeep Cherokee key fob is a quick and easy process that can save you time and money. A dead key fob battery can leave you stranded, so knowing how to change it yourself is essential. This guide provides a step-by-step walkthrough, ensuring you can get back on the road quickly.

Understanding Your 2016 Jeep Cherokee Key Fob

The 2016 Jeep Cherokee key fob is a sophisticated piece of technology that allows you to lock, unlock, and start your vehicle remotely. Over time, the battery powering these functions will inevitably drain. Recognizing the signs of a dying battery, like decreased range or unresponsive buttons, is crucial for addressing the issue proactively. Don’t wait until you’re locked out!

Why Replace the Battery Yourself?

Replacing the key fob battery yourself is a simple DIY task that can save you a trip to the dealership. The cost of a replacement battery is minimal, and the process takes only a few minutes. This guide will empower you to handle this simple maintenance task with confidence.

Gathering the Necessary Tools

Before you begin, gather the following tools:

• A small flat-head screwdriver or similar tool for prying.
• A new CR2032 battery. This is the specific battery type required for the 2016 Jeep Cherokee key fob. Using the correct battery is crucial for proper function.

Step-by-Step Guide: How to Replace Battery in 2016 Jeep Cherokee Key Fob

1. Locate the release button: On the side of your key fob, you’ll find a small release button. This button releases the emergency key blade.

2. Release the emergency key: Press the release button and slide the emergency key blade out of the fob.

3. Pry open the fob: Carefully insert the flat-head screwdriver into the slot where the emergency key was located. Gently pry open the two halves of the key fob. Be cautious not to damage the plastic casing.

4. Remove the old battery: Once the fob is open, you’ll see the CR2032 battery. Use your screwdriver or fingernail to carefully pry the old battery out of its compartment.

5. Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces upwards. Press it firmly into place.

6. Reassemble the fob: Align the two halves of the key fob and press them together until they snap shut. Make sure the fob is securely closed.

7. Test the key fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly.

Common Issues and Troubleshooting

If your key fob still isn’t working after replacing the battery, there are a few things you can try:

• Check the battery orientation: Ensure the new battery is inserted correctly with the positive (+) side facing upwards.
• Try reprogramming the key fob: In some cases, you may need to reprogram your key fob after replacing the battery. Refer to your owner’s manual for instructions on how to do this. [how to change battery in 2016 jeep cherokee key fob](https://keyfobx.com/how-to-change-battery-in-2016 jeep-cherokee-key-fob/) offers additional troubleshooting steps.

Maintaining Your Jeep Cherokee Key Fob

Regular maintenance can extend the life of your key fob battery. Avoid exposing your key fob to extreme temperatures or moisture. Keeping it clean and dry can help prevent corrosion and other damage.

How Long Does a Jeep Cherokee Key Fob Battery Last?

Typically, a Jeep Cherokee key fob battery lasts between 3 to 5 years. However, this can vary depending on usage and environmental factors.

Conclusion

Replacing the battery in your 2016 Jeep Cherokee key fob is a straightforward process that anyone can handle. By following this guide, you can save time and money, and avoid the inconvenience of a dead key fob. Regular maintenance and prompt battery replacement will keep your key fob working reliably for years to come. How To Replace Battery In 2016 Jeep Cherokee Key Fob should no longer be a daunting task.

Reassembled Jeep Cherokee Key Fob

FAQ

1. What type of battery does the 2016 Jeep Cherokee key fob use? A: CR2032
2. How often should I replace my key fob battery? A: Every 3-5 years.
3. What do I do if my key fob still doesn’t work after replacing the battery? A: Check the battery orientation or try reprogramming the key fob.
4. Where can I buy a replacement CR2032 battery? A: Most electronics stores, pharmacies, and online retailers.
5. Is it difficult to replace the battery myself? A: No, it’s a simple DIY task.
6. Can I damage my Key Fob by replacing the battery myself? A: It’s possible if you’re not careful, but following the steps in this guide should prevent damage.
7. Do I need any special tools? A: Just a small flat-head screwdriver or similar tool.

Also check out how to open 2016 jeep grand cherokee key fob for similar information.

Need help? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.