Replacing the battery in your 2019 Subaru key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps involved, providing clear instructions and helpful tips for a seamless battery replacement experience.
Identifying Your 2019 Subaru Key Fob
Before you begin, it’s important to identify the specific key fob for your 2019 Subaru model. Different models may have slightly different key fob designs. Common 2019 Subaru models include the Outback, Forester, Impreza, Legacy, and Ascent. Knowing your specific model will help you find the correct replacement battery and follow the right instructions.
What Type of Battery Does My 2019 Subaru Key Fob Use?
Most 2019 Subaru key fobs use a CR2032 battery, a common type of lithium coin cell battery. You can easily find these batteries at most electronics stores, pharmacies, and online retailers. It’s always a good idea to have a spare CR2032 battery on hand, just in case.
How to Replace the 2019 Subaru Key Fob Battery: Step-by-Step Instructions
Here’s a detailed step-by-step guide on how to replace the battery in your 2019 Subaru key fob:
- Locate the release button: Look for a small release button or slot on the back of your key fob. This button is usually located near the key ring attachment.
- Release the emergency key: Press the release button and slide the emergency key out of the fob.
- Open the key fob casing: Use the emergency key or a small flathead screwdriver to carefully pry open the key fob casing along the seam. Be gentle to avoid damaging the casing.
- Remove the old battery: Once the casing is open, you should see the CR2032 battery. Gently pry it out using your fingernail or the flathead screwdriver.
- Insert the new battery: Insert the new CR2032 battery into the fob, making sure the positive (+) side is facing up.
- Close the key fob casing: Align the two halves of the casing and press them together firmly until they snap shut.
- Reinsert the emergency key: Slide the emergency key back into its slot.
- Test the key fob: Try locking and unlocking your car doors to ensure the new battery is working correctly. If not, double-check the battery installation.
How Long Does a Subaru Key Fob Battery Last?
The lifespan of a Subaru key fob battery typically ranges from 2 to 5 years, depending on usage and environmental factors. Signs that your key fob battery is low include reduced range, intermittent functionality, or the need to press the buttons multiple times. Don’t wait until your key fob completely stops working before replacing the battery. For information on similar Subaru models, see our guide on 2019 subaru outback key fob replacement.
What if My Key Fob Still Doesn’t Work After Replacing the Battery?
If your key fob still doesn’t work after replacing the battery, there could be other issues, such as a faulty key fob or a problem with your car’s keyless entry system. For replacing your entire key fob unit, check out our page on replacement keyless entry remote key fob. You may need to consult a qualified automotive locksmith or your Subaru dealer for further diagnosis and repair. Information specific to Subaru key fob battery replacement can be found at subaru key fob battery replacement.
“Regular maintenance of your key fob, including battery replacement, is essential for ensuring the reliable operation of your vehicle’s keyless entry system,” says John Smith, Senior Automotive Technician at KeyFobX.
Conclusion
Replacing the battery in your 2019 Subaru key fob is a simple and cost-effective procedure. By following these steps, you can quickly restore your key fob to full functionality and avoid the inconvenience of a dead battery. Remember to have a spare CR2032 battery on hand for future replacements. For other Subaru models, you might find our guide on 2019 subaru impreza sport key fob battery replacement helpful.
FAQ
- What type of battery does a 2019 Subaru key fob use? A CR2032 battery.
- How often should I replace my Subaru key fob battery? Every 2 to 5 years, or when you notice reduced range or functionality.
- What tools do I need to replace the battery? A small flathead screwdriver or your emergency key.
- Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
- What if my key fob still doesn’t work after replacing the battery? Consult a locksmith or your Subaru dealer.
- Can I damage my Key Fob by replacing the battery myself? It’s unlikely, but be gentle to avoid damaging the casing.
- Is there a reset procedure after replacing the battery? Usually not necessary, but consult your owner’s manual if you experience issues.
Need additional help? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.
Leave a Reply