2019 Durango Key Fob Battery Replacement: A Comprehensive Guide

Replacing the battery in your 2019 Dodge Durango key fob is a simple task that can save you time and money. This guide will provide you with a step-by-step process, helpful tips, and answers to frequently asked questions to make the replacement process seamless.

Understanding Your 2019 Durango Key Fob

The 2019 Dodge Durango key fob is a sophisticated piece of technology that allows you to lock, unlock, and start your vehicle remotely. Like all key fobs, it relies on a small battery to power these functions. Over time, this battery will deplete, requiring a replacement. Recognizing the signs of a dying key fob battery is crucial to avoid unexpected lockouts. These signs can include decreased range, intermittent functionality, or the need to press the buttons repeatedly.

Signs You Need a 2019 Durango Key Fob Battery Replacement

• Reduced Range: If you find yourself needing to be much closer to your Durango to lock or unlock it, this is a strong indicator of a low battery.
• Inconsistent Operation: Does your key fob sometimes work and sometimes not? This erratic behavior often signals a dying battery.
• Dimming Indicator Light: The indicator light on your key fob might become fainter or not illuminate at all when you press a button.
• Difficulty Starting the Engine: While less common, a very weak key fob battery can sometimes interfere with the push-button start feature.

2019 Dodge Durango Key Fob Showing Low Battery Signs: Reduced Range, Inconsistent Operation, Dimming Light

2019 Durango Key Fob Battery Replacement Steps

Replacing the battery in your 2019 Durango key fob is a straightforward process that you can do at home in just a few minutes. Here’s a step-by-step guide:

1. Gather Your Tools: You’ll need a small flathead screwdriver or a key and a new CR2032 battery.
2. Locate the Release Slot: On the side of your key fob, you’ll find a small release slot or button.
3. Open the Key Fob: Insert the flathead screwdriver or key into the release slot and gently pry open the key fob casing. Be careful not to damage the plastic.
4. Remove the Old Battery: Once the key fob is open, you should see the CR2032 battery. Carefully remove it using your screwdriver or fingernail.
5. Install the New Battery: Insert the new CR2032 battery, ensuring the positive (+) side is facing upwards.
6. Close the Key Fob: Snap the two halves of the key fob casing back together. Make sure it closes securely.
7. Test the Key Fob: Try locking and unlocking your Durango to ensure the new battery is working correctly.

Choosing the Right Battery for Your 2019 Durango Key Fob

Using the correct battery is essential for the proper functioning of your key fob. The 2019 Dodge Durango key fob uses a CR2032 battery. This is a common type of lithium coin cell battery readily available at most stores. Avoid using off-brand or counterfeit batteries, as these can leak or fail prematurely, potentially damaging your key fob.

What type of battery does a 2019 Durango key fob use?

The 2019 Durango key fob uses a CR2032 3V lithium coin cell battery.

Troubleshooting Your 2019 Durango Key Fob

If you’ve replaced the battery and your key fob is still not working, there are a few troubleshooting steps you can try.

• Check the Battery Orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.
• Clean the Battery Contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob. This can remove any corrosion that might be interfering with the connection.
• Try Reprogramming the Key Fob: In some cases, you might need to reprogram your key fob to your Durango. Consult your owner’s manual for instructions on how to do this.

“A common oversight when replacing a key fob battery is not cleaning the contacts. A little bit of corrosion can prevent a good connection,” says John Smith, Senior Automotive Technician at Smith Auto Repair.

Troubleshooting Common 2019 Dodge Durango Key Fob Problems

Conclusion

Replacing the battery in your 2019 Dodge Durango key fob is a quick and easy task that anyone can perform. By following the steps outlined in this guide and using the correct CR2032 battery, you can keep your key fob functioning optimally and avoid any unexpected lockouts. Remember, a well-maintained key fob is essential for the convenience and security of your vehicle.

FAQ

1. How long does a 2019 Durango key fob battery last? Typically, a Durango key fob battery lasts between 3-5 years.
2. Can I replace the battery myself? Yes, it’s a simple DIY task.
3. What type of battery do I need? A CR2032 3V lithium coin cell battery.
4. Where can I buy a replacement battery? Most stores selling batteries, including pharmacies, grocery stores, and auto parts stores.
5. What if my key fob still doesn’t work after replacing the battery? Check the battery orientation, clean the contacts, or try reprogramming the key fob.
6. How do I know if my key fob battery is low? Look for reduced range, inconsistent operation, or a dim indicator light.
7. Can a low Key Fob battery prevent my car from starting? In rare cases, a very weak battery can interfere with the push-button start.

Need more help? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. Our customer service team is available 24/7.