2014 Subaru Outback Key Fob Battery Replacement

Replacing the key fob battery in your 2014 Subaru Outback is a quick and easy process that can save you the hassle and expense of a trip to the dealership. This guide will walk you through the steps, ensuring you get back on the road with a fully functional key fob in no time.

Why Your 2014 Subaru Outback Key Fob Might Need a New Battery

Key fobs, like any electronic device, rely on batteries to function. Over time, these batteries deplete, leading to decreased range and responsiveness. Signs you might need a 2014 Subaru Outback Key Fob Battery Replacement include:

  • Intermittent operation: The key fob only works sometimes, requiring you to be closer to the vehicle than usual.
  • Reduced range: You find yourself having to be right next to the car for the key fob to unlock or lock the doors.
  • No response: The key fob is completely unresponsive, leaving you stranded.

Don’t wait until your key fob completely dies to replace the battery. It’s a simple preventative measure that can save you a headache down the road.

What Battery Does a 2014 Subaru Outback Key Fob Use?

The 2014 Subaru Outback key fob uses a CR2032 battery. This is a common lithium cell battery readily available at most electronics stores, pharmacies, and online retailers. It’s always a good idea to keep a spare on hand.

How to Replace Your 2014 Subaru Outback Key Fob Battery: A Step-by-Step Guide

Replacing the battery is a DIY task you can accomplish in a few minutes. Here’s how:

  1. Locate the release notch: On the side of your key fob, you’ll find a small notch or slot.
  2. Insert a small flathead screwdriver: Gently insert the screwdriver into the notch and pry open the key fob casing. Be careful not to damage the plastic.
  3. Identify the old battery: Inside the key fob, you’ll see the CR2032 battery.
  4. Remove the old battery: Carefully pry out the old battery. You can use the same flathead screwdriver, but be gentle to avoid damaging the contacts.
  5. Insert the new battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces up, the same way the old battery was positioned.
  6. Close the key fob: Snap the two halves of the key fob casing back together.

Testing Your New 2014 Subaru Outback Key Fob Battery

After replacing the battery, test all the key fob functions: locking and unlocking the doors, panic button, and remote start (if equipped). Everything should work flawlessly. If not, double-check that the battery is correctly installed and that the contacts are clean.

What if the key fob still doesn’t work?

If your key fob continues to malfunction after a battery replacement, it could indicate a more serious issue, such as a faulty key fob or a problem with the car’s receiver. In this case, it’s best to consult a qualified automotive technician.

Preventing Future 2014 Subaru Outback Key Fob Battery Issues

While battery replacement is inevitable, you can prolong the life of your key fob battery by avoiding extreme temperatures and keeping it dry. Also, avoid dropping your key fob, as impacts can damage the internal components.

Conclusion

Replacing the 2014 Subaru Outback key fob battery is a simple and cost-effective procedure that anyone can perform at home. By following the steps outlined above, you can keep your key fob functioning optimally and avoid the inconvenience of a dead battery.

FAQ

  1. How long does a 2014 Subaru Outback key fob battery last? Typically, a CR2032 battery in a key fob can last anywhere from 2 to 5 years, depending on usage.
  2. Can I use a different type of battery? No, it’s crucial to use a CR2032 battery. Using a different type can damage the key fob.
  3. What if I damage the key fob while trying to open it? If you damage the key fob casing, you may need to replace the entire key fob. Contact a dealership or locksmith for assistance.
  4. Where can I buy a CR2032 battery? CR2032 batteries are widely available at most electronics stores, pharmacies, and online retailers.
  5. My key fob still doesn’t work after replacing the battery. What should I do? If your Key Fob continues to malfunction after a battery replacement, consult a qualified automotive technician.

For further support, contact us via WhatsApp: +1(641)206-8880, Email: [email protected], or visit us at 123 Maple Street, New York, USA 10001. We have a 24/7 customer support team.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *