Lost your 2009 Chevy Impala Key Fob or need to program a new replacement? Don’t worry, programming your key fob for your 2009 Chevrolet Impala can be a straightforward process you can do yourself at home. This guide provides you with two easy-to-follow procedures, depending on whether your vehicle is equipped with a driver information center. Follow these steps to get your key fob working quickly and efficiently.
Procedure 1: For Vehicles With Driver Information Center
This procedure applies to 2009 Chevy Impala models that have a driver information center. You can identify this by looking for buttons on your steering wheel that include an “i” symbol.
-
Ignition On Position: Insert your key into the ignition. Turn the key to the “On” position, just before starting the engine. Ensure you do not start the car.
-
Access Relearn Remote Key Menu: Locate the “Information” button on your steering wheel. Press this button repeatedly until the display in your driver information center shows “Relearn Remote Key”.
-
Initiate Learning Mode: Once “Relearn Remote Key” is displayed, press the “Set/Reset” button. This button typically has a checkmark symbol on it. Press it until the display changes to “Remote Key Learning Active”. Your vehicle is now in programming mode, ready to learn the new key fob.
-
Program the Key Fob: Take the key fob you wish to program. Simultaneously press and hold down both the “Lock” and “Unlock” buttons on the fob. Continue holding them until the vehicle emits two chimes. These chimes indicate that the key fob has been successfully programmed. If you have additional or existing remotes to program, repeat this step 4 for each of them now to ensure all key fobs work with your vehicle.
-
Exit Programming Mode: Turn the ignition key to the “Off” position. This will exit the programming mode. Test all programmed key fobs to ensure they are working correctly with your 2009 Chevy Impala.
Procedure 2: For Vehicles Without Driver Information Center
If your 2009 Chevy Impala does not have a driver information center with the “i” button, use this procedure instead.
-
Ignition On Position: Insert the key into the ignition and turn it to the “On” position, without starting the engine.
-
Access Relearn Remote Key with Trip Reset: Locate the trip odometer reset button, usually found on the instrument panel cluster. Press and release this button until the display shows “Relearn Remote Key”.
-
Activate Learning Mode: Press and hold the trip odometer reset button. Keep holding it until the display changes to “Remote Key Learning Active”. The vehicle is now ready to program your key fob.
-
Program the Key Fob: On the key fob you are programming, press and hold both the “Lock” and “Unlock” buttons simultaneously. Hold these buttons until the vehicle chimes twice. This confirms successful programming of the key fob. Repeat this step for all other key fobs you need to program, including any existing ones, to ensure they all function.
-
Exit Programming Mode: Turn the ignition key to the “Off” position to exit the key fob programming mode. Test each key fob to verify successful programming with your 2009 Chevrolet Impala.
Important Note: If you encounter any issues or if some of your remotes stop working after programming, remember step 4 is crucial. You must program all remotes you intend to use in a single programming session. If you only program a new fob, any previously programmed fobs will no longer work unless you reprogram them at the same time.
If you’re still having trouble programming your 2009 Chevy Impala key fob, consider seeking assistance from a professional locksmith or dealership. For replacement key fobs for your Chevy Impala or other vehicles, visit Keylessentryremotefob.com for a wide selection.
