Knowing how to replace the battery in your Subaru key fob can save you time and money. A dying key fob battery can be frustrating, leading to issues unlocking your car or starting the engine. This guide provides a simple, step-by-step process for replacing your Subaru key fob battery.
Replacing your Subaru key fob battery is a straightforward process that can be done at home with minimal tools. You’ll need a new CR2032 battery, a small flat-head screwdriver, and a few minutes of your time. Different Subaru models might have slightly different key fob designs, but the basic principles remain the same. Let’s dive into the details.
Locating the Release Button on Your Subaru Key Fob
The first step in replacing your Subaru key fob battery is finding the small release button or slot on the fob. This button is usually located on the side or back of the key fob. Once you’ve located the release button, use your flat-head screwdriver to gently press it. This will separate the key fob into two halves. 2015 subaru wrx key fob battery replacement demonstrates a similar process, though the exact location of the release button might vary.
Opening the Key Fob
With the release button pressed, gently pull the two halves of the key fob apart. Be careful not to use excessive force, as this could damage the internal components. Inside, you should see the battery compartment, which houses the CR2032 battery.
Removing the Old Battery and Installing the New One
Once you’ve opened the key fob, you’ll see the old CR2032 battery. Use your flat-head screwdriver or a similar tool to carefully pry the old battery out of its compartment. Make sure you note the battery’s orientation so you can install the new one correctly. Insert the new CR2032 battery into the compartment, ensuring it’s positioned correctly, matching the orientation of the old battery.
Reassembling Your Subaru Key Fob
After inserting the new battery, align the two halves of the key fob and press them together firmly until they click back into place. Test the key fob by trying to lock and unlock your car. If the key fob functions correctly, you’ve successfully replaced the battery. For specific instructions for a 2014 Subaru Crosstrek, you can refer to 2014 subaru crosstrek key fob battery.
What type of battery does a Subaru key fob use?
Subaru key fobs typically use a CR2032 battery. These are readily available at most electronics stores, pharmacies, and online retailers.
Why is my Subaru key fob not working after replacing the battery?
Several reasons might cause your key fob to malfunction even after replacing the battery. The battery might be installed incorrectly, or there could be a problem with the key fob itself. Check the battery orientation and try reinstalling it. If the problem persists, you might need to consult a professional. You can check out resources for other Subaru models like the 2010 subaru impreza key fob battery or the 2016 subaru wrx key fob battery replacement for more troubleshooting tips. Or perhaps the 2011 subaru impreza key fob battery guide will offer some helpful insights.
Conclusion: Replacing your Subaru Key Fob Battery is Easier Than You Think!
Replacing the battery in your Subaru key fob is a simple and cost-effective DIY task that anyone can handle. By following these steps, you can avoid the inconvenience and expense of a dead key fob. Remember to always have a spare CR2032 battery on hand to avoid any unexpected lockouts.
FAQ
- How often should I replace my Subaru key fob battery? Typically, every 2-3 years.
- Can I use any brand of CR2032 battery? Yes, most brands will work fine.
- What if my key fob still doesn’t work after replacing the battery? Try re-inserting the battery or consult a professional.
- Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
- Is there a way to test my key fob battery? Yes, try locking and unlocking your car.
- Can I damage my key fob by replacing the battery myself? It’s unlikely, but be gentle during the process.
- Do all Subaru Key Fobs use the same battery? Most use a CR2032, but always double-check your owner’s manual.
Need help? Contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. We have a 24/7 customer support team.
Leave a Reply