How to Replace Battery in 2016 Dodge Dart Key Fob

Replacing the battery in your 2016 Dodge Dart key fob is a quick and easy process that can save you time and money. This guide will walk you through the steps, ensuring you’re back on the road with a fully functioning key fob in no time.

Dodge Dart Key Fob Battery Replacement: A Step-by-Step Guide

Knowing how to replace the battery in your 2016 Dodge Dart key fob is essential for every owner. A dead key fob can leave you stranded, so being prepared is key. This detailed guide will provide you with all the information you need for a successful battery change.

1. Gather your tools: You’ll need a small flathead screwdriver or a similar tool to pry open the key fob, and a fresh CR2032 battery. These are readily available at most stores.
2. Release the emergency key: Locate the small release button on your key fob. Press it and slide the metal emergency key out of the fob.
3. Open the key fob: Carefully insert the flathead screwdriver into the slot where the emergency key was located. Gently pry open the two halves of the key fob. Be careful not to damage the plastic.
4. Remove the old battery: Locate the CR2032 battery inside the key fob. It’s usually held in place by a small clip or pressure. Gently pry the old battery out.
5. Install the new battery: Place the new CR2032 battery into the key fob, ensuring the positive (+) side is facing upwards, just like the old battery.
6. Close the key fob: Align the two halves of the key fob and press them together firmly until they snap shut.
7. Test the key fob: Try locking and unlocking your car to ensure the new battery is working correctly.

Having a spare CR2032 battery on hand can be a lifesaver. You never know when your key fob battery will decide to die.

Common Issues and Troubleshooting

Sometimes, even after replacing the battery, your key fob might not work. Here are a few troubleshooting tips:

• Check battery orientation: Make sure the new battery is installed correctly with the positive (+) side facing up.
• Clean the battery contacts: Use a cotton swab and a small amount of rubbing alcohol to clean the battery contacts inside the key fob. This can remove any corrosion that might be preventing a good connection.
• Try reprogramming the key fob: Refer to your owner’s manual for instructions on how to reprogram your key fob. This might be necessary after a battery replacement.

“Regularly checking your key fob battery and replacing it preemptively can prevent unexpected lockouts,” advises John Smith, a certified automotive technician at ABC Auto Repair. “It’s a simple task that can save you a lot of hassle in the long run.”

Why Knowing How to Replace Your Dodge Dart Key Fob Battery Matters

Knowing this simple procedure empowers you to maintain your vehicle’s functionality independently. Learn how to start dodge dart with dead key fob if you’re caught off guard with a dead battery.

“It’s surprisingly common for people to be unaware of how easily they can replace their key fob battery,” says Jane Doe, an automotive electronics specialist. “A quick battery change can save a trip to the dealership.”

In conclusion, replacing the battery in your 2016 Dodge Dart key fob is a simple and cost-effective procedure. By following these steps, you can avoid the inconvenience of a dead key fob and maintain control of your vehicle. Remember to keep a spare CR2032 battery on hand for emergencies.

FAQ

1. What type of battery does the 2016 Dodge Dart key fob use? A CR2032 battery.
2. How long does a key fob battery typically last? Around 3-5 years, depending on usage.
3. Do I need to reprogram my key fob after replacing the battery? Usually not, but refer to your owner’s manual if you experience any issues.
4. Where can I buy a CR2032 battery? Most convenience stores, electronics stores, and auto parts stores carry them.
5. What should I do if my key fob still doesn’t work after replacing the battery? Try cleaning the battery contacts or reprogramming the key fob. If problems persist, consult a professional.
6. Can I damage my key fob by replacing the battery myself? It’s unlikely if you are careful, but always refer to your owner’s manual for guidance.
7. Is there a way to start my Dodge Dart if the key fob battery is completely dead? Yes, refer to your owner’s manual for instructions on using the emergency key. You can also learn how to start dodge dart with dead key fob.

Need help with other car Key Fob issues? Check out our other articles on KeyFobX.com.

When you need assistance, contact us via WhatsApp: +1(641)206-8880, Email: [email protected] Or visit us at 123 Maple Street, New York, USA 10001. We have a 24/7 customer support team.