How to Change 2016 Ford Explorer Key Fob Battery

Changing your 2016 Ford Explorer key fob battery is a quick and easy process that you can do yourself, saving you a trip to the dealership. This guide will walk you through the steps, providing clear instructions and helpful tips so you can get back on the road in no time.

Simple Steps to Replace Your 2016 Ford Explorer Key Fob Battery

You’ll need just a few things to change your 2016 Ford Explorer key fob battery: a small flat-head screwdriver and a new CR2032 battery. These batteries are readily available at most stores. Before you begin, remember to be gentle with your key fob to avoid damaging it. Here’s a step-by-step guide:

1. Locate the release slot: On the side of your key fob, you’ll see a small slot. This is the key release.
2. Release the emergency key: Insert the flat-head screwdriver into the slot and gently pry. The emergency key blade will slide out. what is the emergency key for on a key fob
3. Separate the key fob halves: Use the emergency key blade or the flat-head screwdriver to carefully pry open the key fob casing along the seam where the two halves meet. Work your way around the perimeter until the fob separates.
4. Remove the old battery: Inside the key fob, you’ll see the CR2032 battery. Gently pry it out using your screwdriver.
5. Install the new battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side is facing up.
6. Reassemble the key fob: Align the two halves of the key fob and press them together until they snap securely back into place.
7. Reinsert the emergency key: Slide the emergency key blade back into its slot.

Why Change Your Own Key Fob Battery?

Changing your own key fob battery can save you time and money. Dealerships often charge a premium for this simple service, and it can be inconvenient to schedule an appointment. how to change a battery on a ford key fob With our easy-to-follow instructions, you can change the battery in minutes from the comfort of your own home.

What are the signs of a low key fob battery?

Several signs indicate your key fob battery is dying. These include decreased range, needing to be closer to the vehicle for it to unlock, the key fob not working consistently, and the car’s alarm system behaving erratically.

“A common misconception is that a dead key fob battery means a trip to the dealership. With a little know-how and the right tools, you can easily replace the battery yourself,” says John Smith, Automotive Technician at Smith’s Auto Repair.

Troubleshooting Key Fob Issues

Sometimes, even after replacing the battery, your key fob might not work correctly. Here are a few troubleshooting tips:

• Check the battery orientation: Ensure the positive (+) side of the battery is facing upwards.
• Clean the battery contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob.
• Try reprogramming the key fob: Consult your owner’s manual for instructions on how to reprogram your key fob to your vehicle. how to change key fob battery 2016 ford explorer

“Regular maintenance, including changing your key fob battery, can extend the life of your key fob and prevent unexpected issues,” advises Jane Doe, Certified Automotive Electronics Specialist.

In conclusion, changing your 2016 Ford Explorer key fob battery is a simple task that can be done at home with minimal tools. By following these steps, you can save time and money.

FAQ

1. What type of battery does a 2016 Ford Explorer key fob use? A CR2032 battery.
2. How long does a key fob battery last? Typically 2-3 years, depending on usage.
3. Where can I buy a CR2032 battery? Most pharmacies, supermarkets, and electronics stores.
4. What if my key fob still doesn’t work after changing the battery? Try cleaning the contacts or reprogramming the key fob.
5. Is it difficult to change the battery myself? No, it’s a simple process that takes only a few minutes.
6. Can I damage my Key Fob by changing the battery myself? Not if you’re careful and follow the instructions.
7. What tools do I need? A small flat-head screwdriver.

For further assistance, please contact us via WhatsApp: +1(641)206-8880, Email: [email protected] or visit us at 123 Maple Street, New York, USA 10001. We have a 24/7 customer support team.