Is your Ford Edge 2015 key fob not working as reliably as it used to? You might be facing a common issue: a dead or dying key fob battery. As a car repair expert at keyfobx.com, I understand the frustration this can cause. Fortunately, replacing the battery in your Ford Edge 2015 key fob is a simple task you can easily do yourself. This guide will walk you through the process for both types of key fobs used with the 2015 Ford Edge, ensuring you can get back to smoothly accessing and starting your vehicle.
Understanding Your Ford Edge 2015 Key Fob Types
The 2015 Ford Edge could come equipped with one of two types of key fobs: the Integrated Keyhead Transmitter (IKT) and the Intelligent Access key (IA key). While both serve the same primary functions, their designs are slightly different, and thus, the battery replacement procedure varies slightly. Don’t worry, both are equally easy to handle. Let’s identify which type you have and then get started with the battery replacement.
Step-by-Step Guide to Ford Edge 2015 Key Fob Battery Replacement
Before we begin, gather these simple tools:
- A new CR2032 battery. This is the standard battery for most Ford key fobs.
- A small flat-head screwdriver or a thin coin.
Now, let’s get your key fob powered up again.
Replacing the Battery in an Integrated Keyhead Transmitter (IKT)
If your key fob looks similar to a standard key with the key head integrated into the fob itself, you likely have an IKT. Here’s how to replace its battery:
-
Locate the Slot: On the back of your IKT key fob, near the key ring, you’ll find a small slot.
-
Open the Casing: Insert the tip of your flat-head screwdriver or a thin coin into this slot. Gently twist the screwdriver or coin. This will separate the battery cover from the rest of the key fob.
Alt text: Opening the Ford IKT key fob casing using a coin in the designated slot.
-
Remove the Battery Cover: Once twisted, the battery cover should easily detach. Carefully remove it to access the battery compartment.
-
Remove the Old Battery: You’ll see the old CR2032 battery. Take it out of its housing. Note the orientation of the battery (+ side up or down) as you remove it.
-
Insert the New Battery: Place the new CR2032 battery into the compartment, ensuring it’s in the correct orientation (usually positive side up). Press down firmly to make sure it’s securely seated.
-
Reattach the Battery Cover: Align the battery cover back onto the key fob and snap it firmly into place. You should hear a click indicating it’s properly closed.
Replacing the Battery in an Intelligent Access Key (IA Key)
If your Ford Edge 2015 key fob is the Intelligent Access type, it will have a removable backup key. Here’s how to change the battery in this type of fob:
-
Remove the Backup Key: Locate the small release button or latch on your IA key fob. Press and hold it while pulling out the backup key.
-
Find the Hidden Slot: With the backup key removed, you’ll see a slot where the key was housed. This slot is slightly hidden.
-
Open the Casing: Insert your flat-head screwdriver or coin into this hidden slot. Gently twist to separate the battery cover.
Alt text: Opening the Ford Intelligent Access key fob casing with a coin in the hidden slot after backup key removal.
-
Remove the Old Battery: Carefully remove the battery cover to reveal the CR2032 battery. Take out the old battery, again noting its orientation.
-
Insert the New Battery: Place the new CR2032 battery into the compartment in the correct orientation. Press it down to ensure it is firmly seated.
-
Reattach the Battery Cover and Backup Key: Snap the battery cover back onto the key fob until it clicks shut. Finally, slide the backup key back into its slot until it locks into place.
Tips and Troubleshooting
- Battery Type: Always use a CR2032 battery for your Ford Edge 2015 key fob. Using a different type might cause malfunctions.
- Grease on Terminals: You might notice some grease on the battery terminals or circuit board. Do not wipe this off, as it’s there to ensure good electrical contact and prevent corrosion.
- Battery Orientation: Double-check the correct battery orientation before inserting the new one. Incorrect orientation can prevent the key fob from working.
- Disposal: Dispose of the old battery responsibly according to your local regulations for electronic waste.
- Reprogramming Not Required: You do not need to reprogram your key fob after a battery replacement. It should work immediately after you install the new battery.
- If It Still Doesn’t Work: If your key fob still doesn’t work after replacing the battery, there might be another issue. Consider checking the battery contacts for corrosion or seeking professional assistance from a locksmith or Ford dealership.
Conclusion
Replacing the battery in your Ford Edge 2015 key fob is a straightforward process that can save you time and money compared to visiting a dealership. By following these simple steps, you can quickly restore the functionality of your key fob and enjoy the convenience of remote access to your vehicle once again. Keep a spare CR2032 battery handy, and you’ll be prepared for the next time your key fob battery needs replacing!
