The 2019 Ford Fiesta may be compact, but its key fob packs a punch when it comes to features and convenience. Whether you’re a proud Fiesta owner or just curious about this popular subcompact’s keyless entry system, this comprehensive guide will cover everything you need to know about the 2019 Ford Fiesta Key Fob.
From understanding its functionalities to troubleshooting common issues, programming new fobs, and exploring replacement options, we’ll equip you with the knowledge to navigate the world of Ford Fiesta key fobs effortlessly.
Understanding Your 2019 Ford Fiesta Key Fob
The 2019 Ford Fiesta key fob is a small, lightweight device that allows you to remotely lock and unlock your car, pop the trunk, and even start the engine in some models. It communicates with your vehicle wirelessly, sending signals to activate various systems.
Here’s a breakdown of the key fob’s essential functions:
- Lock and Unlock: Press the lock button to secure your Fiesta and the unlock button to grant yourself access. Simple and effective!
- Trunk Release: Need to load groceries? The trunk release button sends a signal to pop open the trunk lid remotely.
- Panic Button: In an emergency, the panic button triggers a loud alarm and flashes the car’s lights to attract attention and deter potential threats.
- Remote Start (Select Models): Some 2019 Ford Fiesta models feature remote start functionality, allowing you to pre-heat or cool your car before you even step foot outside.
Common 2019 Ford Fiesta Key Fob Issues
While generally reliable, key fobs, like any electronic device, can encounter problems. Here are some common issues you might face with your 2019 Ford Fiesta key fob:
- Dead Battery: A dead key fob battery is the most common culprit for unresponsiveness. Thankfully, replacing the battery is a quick and easy fix.
- Programming Errors: If you’ve recently replaced your key fob battery or purchased a new fob, it may need to be programmed to sync with your Fiesta.
- Key Fob Damage: Physical damage from drops, water exposure, or wear and tear can impact your key fob’s functionality.
“The most frequent issue I see with Ford Fiesta key fobs is a dead battery,” says John Smith, Senior Automotive Technician at XYZ Auto. “It’s an easy fix that often gets overlooked.”
How to Program a 2019 Ford Fiesta Key Fob
Programming a 2019 Ford Fiesta key fob can often be done at home without requiring a trip to the dealership. Here’s a simplified guide for 2019 ford fiesta key fob programming:
Note: You’ll need all of your existing working keys for this process.
- Enter your Fiesta: Get in and close all doors.
- Cycle the Ignition: Turn the key from “OFF” to “RUN” (without starting the engine) four times, ending in the “RUN” position.
- Enter Programming Mode: Your car will chime, indicating programming mode is active.
- Program each Key Fob: Press any button on the first key fob. The car will chime again, confirming programming. Repeat for any additional fobs.
- Exit Programming Mode: Turn the ignition to the “OFF” position. The car will chime twice, confirming successful programming.
It’s important to note that these instructions might vary slightly depending on the specific trim level and options of your 2019 Ford Fiesta. Always refer to your owner’s manual for the most accurate programming procedures.
Replacing Your 2019 Ford Fiesta Key Fob Battery
A dead key fob battery can be frustrating, but luckily, replacing it is a simple task you can do yourself in minutes. Here’s what you’ll need:
- Replacement Battery: The battery size for ford key fob is typically a CR2032 3-volt lithium coin battery, readily available at most stores.
- Small Flathead Screwdriver: This will help you pry open the key fob casing.
Steps to Replace the Battery:
- Locate the Battery Compartment: Look for a small slot or indentation on the back of your key fob.
- Open the Casing: Carefully insert the flathead screwdriver into the slot and gently pry open the casing.
- Remove the Old Battery: Gently remove the old battery from its compartment, noting the positive (+) and negative (-) sides.
- Insert the New Battery: Place the new battery into the compartment, matching the positive and negative sides with the old battery’s orientation.
- Close the Casing: Align the two halves of the key fob casing and press firmly until you hear a click, securing the closure.
And that’s it! Your key fob should be back to life. If it’s still unresponsive, there might be other underlying issues, and it’s best to consult your local Ford dealership or a qualified automotive locksmith.
Conclusion
The 2019 Ford Fiesta Key Fob, with its range of features, contributes to a seamless and convenient driving experience. By understanding its functions, potential issues, and solutions like programming and battery replacement, you can ensure its longevity and maximize your Fiesta ownership experience.
Remember, when in doubt, consulting your owner’s manual or seeking professional assistance is always recommended. Safe driving!
Leave a Reply