2020 Hyundai Elantra Key Fob Battery: Everything You Need to Know

The 2020 Hyundai Elantra is known for its sleek design and impressive performance, but even the most reliable vehicles require occasional maintenance. One common issue many Elantra owners encounter is a dying key fob battery. If you’re experiencing difficulties locking, unlocking, or starting your Elantra, a dead key fob battery may be the culprit. This comprehensive guide covers everything you need to know about your 2020 Hyundai Elantra key fob battery, from identifying the signs of a dying battery to replacing it yourself.

Recognizing a Dying Key Fob Battery

Before you start disassembling your key fob, it’s helpful to be certain that the battery is the actual problem. Here are a few telltale signs that your Hyundai Elantra key fob battery might need replacing:

  • Decreased Signal Range: You find yourself needing to stand closer to your vehicle for the key fob to work.
  • Intermittent Functioning: The key fob sometimes works and sometimes doesn’t, leading to a frustrating game of trial and error.
  • Dashboard Warning Light: Some Elantra models may display a warning light on the dashboard indicating low key fob battery.
  • No Response: The key fob completely fails to respond, leaving you stranded.

What Battery Does My 2020 Hyundai Elantra Key Fob Use?

The 2020 Hyundai Elantra key fob uses a CR2032 battery, a common type of lithium coin battery readily available at most electronic and automotive stores.

Tools Needed for Replacing Your Key Fob Battery

Replacing the battery in your 2020 Hyundai Elantra key fob is a surprisingly simple task that requires minimal tools:

  • Small Flathead Screwdriver: This will help you pry open the key fob casing.
  • New CR2032 Battery: Have the replacement battery ready to go.

How to Replace Your 2020 Hyundai Elantra Key Fob Battery: A Step-by-Step Guide

Follow these straightforward steps to replace your Hyundai Elantra key fob battery like a pro:

  1. Locate the Key Fob Release Button: On the back of your key fob, find the small release button.
  2. Release the Metal Key: Press the release button and gently slide out the metal key from the fob.
  3. Separate the Key Fob Halves: Use the small flathead screwdriver to carefully pry open the key fob casing along the seam. Be gentle to avoid damaging the casing.
  4. Remove the Old Battery: Inside the key fob, you’ll see the CR2032 battery. Gently pry it out using the screwdriver or your fingernail.
  5. Insert the New Battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side is facing up.
  6. Reassemble the Key Fob: Align the halves of the key fob casing and press them firmly together until you hear a click, indicating it’s securely closed.
  7. Reinsert the Metal Key: Slide the metal key back into its slot on the fob.
  8. Test the Key Fob: Try locking and unlocking your car and starting the engine to verify that the new battery is working correctly.

Tips for Maintaining Your Key Fob Battery Life

While key fob batteries inevitably need replacement over time, these tips can help prolong their lifespan:

  • Avoid Extreme Temperatures: Exposure to very hot or cold temperatures can drain the battery faster.
  • Keep it Away From Water: Moisture is a battery’s worst enemy, so avoid getting your key fob wet.
  • Don’t Panic If It Gets Wet: If your key fob gets wet, remove the battery immediately and let all the components dry thoroughly before reassembling.

When to Seek Professional Help

If you’ve replaced the battery in your Hyundai Elantra key fob and are still experiencing problems, it’s best to consult a qualified automotive locksmith or your Hyundai dealership. There might be a more complex issue with the key fob’s electronics that requires professional attention.

Frequently Asked Questions

Q: How long does a Hyundai Elantra key fob battery last?

A: On average, a Hyundai Elantra key fob battery lasts between 3 to 5 years, depending on usage and environmental factors.

Q: Can I use any CR2032 battery for my Hyundai Elantra key fob?

A: While any CR2032 battery will technically fit, it’s recommended to use a reputable brand for optimal performance and longevity.

Q: Can I replace the Hyundai Elantra key fob battery myself?

A: Absolutely! Replacing the key fob battery is a simple DIY task that most people can do at home in minutes.

Q: What if I replace the battery and my key fob still doesn’t work?

A: If replacing the battery doesn’t solve the problem, there might be an issue with the Key Fob’s electronics. Contact a qualified automotive locksmith or your Hyundai dealership for assistance.

Need More Help with Your Hyundai Key Fob?

Explore these additional resources on KeyFobX:

We are committed to providing you with the latest information and resources to keep your Hyundai running smoothly. If you require further assistance, don’t hesitate to reach out to our expert team via WhatsApp at +1(641)206-8880 or email us at [email protected]. Our dedicated customer support team is available 24/7 to address your needs.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *