Are you having trouble with your Volkswagen key fob? Perhaps the key sticks out when it shouldn’t, or you need to access the internal components for repair or battery replacement. While official guides are scarce, disassembling your VW key fob is achievable with careful steps. This guide, based on hands-on experience, will show you how to safely take apart your Volkswagen Kessy key fob.
Before you begin, please be aware that this process involves some minor cutting of the key fob casing in hidden areas. Proceed at your own risk. We are not responsible for any damage you may cause to your key fob.
Tools You’ll Need
- Small, flat-head screwdriver
- Thin screwdriver or pin removal tool
- Needle-nose pliers
- Cutting tool (like a hobby knife or similar)
Step-by-Step Disassembly Guide
Follow these steps to carefully take apart your Volkswagen key fob:
Step 1: Remove the Battery Cover
Start by removing the battery cover. This is usually located on the back of the key fob and can be pried open with your fingernail or a small flat-head screwdriver.
Step 2: Locate and Access the Front Pin
The front pin is positioned under the key blade. To access it, you may need to flip out the key.
Step 3: Access and Remove the Rear Pin
The rear pin runs parallel to the keyring loop. Gaining access to this pin requires a small incision. You’ll need to carefully cut away a small section of the plastic casing at the bottom left corner of the key fob. This will expose the rear pin, allowing you to work with it.
Once exposed, use a thin screwdriver or pin removal tool to push the rear pin from left to right, effectively sliding it out.
Step 4: Remove the Front Pin
Similar to the rear pin, you’ll need to create a small opening to access the front pin. Carefully cut around the front pin area to provide enough space to grip it with needle-nose pliers.
With the front pin accessible, use needle-nose pliers to gently pull and remove it.
Step 5: Separate the Key Fob Case
With both pins removed, you can now separate the key fob case. Start prying apart the case at the panic button area.
Work your way around the case, carefully unsnapping the clips that hold the two halves together.
Step 6: Component Overview
Once the case is open, you’ll see the internal components of your Volkswagen key fob. This may include the circuit board, battery, and buttons.
Conclusion
By following these steps, you can successfully take apart your Volkswagen key fob. This can be helpful for various reasons, such as fixing a sticky key issue or replacing the battery. Remember to proceed with caution and at your own risk. This guide is based on a user experience and may vary slightly depending on your specific Volkswagen key fob model.
