If you’re experiencing issues with your 2013 Hyundai Tucson key fob, like having to stand right next to your car to unlock it or pressing the buttons multiple times to get a response, then a dead battery is likely the culprit. Don’t worry, though! Replacing the key fob battery is a simple task you can do yourself, saving you a trip to the dealership.
What You’ll Need to Replace Your 2013 Hyundai Tucson Key Fob Battery
Before you begin, gather the following items:
- A new CR2032 battery (easily found at most convenience stores or online)
- A small flat-head screwdriver or a coin
How to Replace Your 2013 Hyundai Tucson Key Fob Battery: A Step-by-Step Guide
Follow these easy steps to change your key fob battery:
- Locate the key release button: On the back of your key fob, you’ll find a small button. Press this button to release the metal key from the fob.
- Open the key fob: Use the tip of your flat-head screwdriver or the edge of a coin to pry open the key fob casing. Look for a small notch or indentation along the edge of the fob to insert your tool. Be gentle to avoid damaging the casing.
- Remove the old battery: Once the casing is open, you’ll see the CR2032 battery inside. Carefully remove the old battery by gently prying it out.
- Install the new battery: Place the new CR2032 battery into the fob, ensuring the positive (+) side faces up. This is usually marked on the battery itself.
- Reassemble the key fob: Align the two halves of the fob casing and press them together until you hear a click, indicating it’s securely closed.
- Test the key fob: Try locking and unlocking your car doors using the key fob buttons to ensure the new battery is working correctly.
Troubleshooting: What if My Key Fob Still Doesn’t Work?
If you’ve replaced the battery and your key fob is still acting up, there are a few other things to check:
- Check the battery installation: Ensure the new battery is installed correctly with the positive (+) side facing up.
- Clean the battery contacts: Over time, the battery contacts inside the key fob can get dirty or corroded. Use a cotton swab and a small amount of rubbing alcohol to clean the contacts gently.
- Reprogram the key fob: In some cases, you might need to reprogram your key fob to your car. This process can vary depending on your specific Hyundai Tucson model, so consult your owner’s manual for instructions.
Still Having Trouble? KeyFobX Can Help!
Replacing your 2013 Hyundai Tucson Key Fob battery is a straightforward process. However, if you’re still experiencing issues, our team at KeyFobX is always here to assist you. Contact us via WhatsApp at +1(641)206-8880 or email us at [email protected] for 24/7 support. Our expert team is ready to answer your questions and provide guidance on any Key Fob issue.
Leave a Reply