Is your Acura Tl Key Fob not working? Or perhaps you’ve got a new key fob that needs programming to your vehicle? Don’t worry, you can easily program your Acura TL key fob right at home without needing to visit a dealership. This guide provides you with a simple, step-by-step process to get your key fob working perfectly with your Acura TL.
Before you begin, ensure all doors, the hood, and the trunk lid of your Acura TL are properly closed. It’s crucial to follow these steps accurately and within the specified timeframes for successful programming.
Here’s how to program your Acura TL key fob:
-
Turn the ignition switch to the ON position (II).
-
Within 1 to 4 seconds of turning the ignition ON, press the Lock or Unlock button on your key fob. Make sure to aim the key fob towards the keyless receiver unit. This unit is typically located behind the driver’s side of the dashboard.
-
Within 1 to 4 seconds after pressing the key fob button, turn the ignition switch to the OFF position.
-
Again, within 1 to 4 seconds of turning the ignition OFF, turn the ignition switch back to the ON position (II).
-
Repeat the button press on your key fob (Lock or Unlock) within 1 to 4 seconds of turning the ignition ON. Remember to aim towards the receiver.
-
Turn the ignition switch OFF within 1 to 4 seconds.
-
Turn the ignition switch ON (II) once more, within 1 to 4 seconds.
-
Press the Lock or Unlock button on the key fob within 1 to 4 seconds, aiming at the receiver.
-
Turn the ignition switch OFF within 1 to 4 seconds.
-
Turn the ignition switch ON (II) for the final time in this sequence, within 1 to 4 seconds.
-
Press the Lock or Unlock button on your key fob within 1 to 4 seconds, directed at the receiver unit.
-
Listen carefully for the sound of the door lock actuators. You should hear them activate within 1 to 4 seconds. Once you hear this, immediately press the Lock or Unlock button on the key fob again. This second press is vital to ensure the code is stored correctly. If you miss this step, or turn the ignition OFF prematurely, the programming process will be cancelled for all remotes.
-
If you have additional key fobs to program (up to two more), you have a 10-second window after the door lock actuators sound to program them. Aim each additional key fob at the keyless receiver and press the Lock or Unlock button. You should hear the door lock actuators confirm that each additional key fob code is successfully stored.
-
After programming all key fobs, turn the ignition switch to the OFF position and remove the key from the ignition.
-
Test each key fob to confirm they are working correctly. Check if the lock and unlock buttons are functioning as expected.
By following these instructions carefully, you should be able to successfully program your Acura TL key fob and regain full remote access to your vehicle. This simple DIY process can save you time and money compared to dealership programming services.
