Battery for 2015 Altima Key Fob: A Simple Replacement Guide

Is your 2015 Nissan Altima key fob not working reliably? It might be time for a battery replacement. Don’t worry, this is a simple fix you can do yourself, saving you time and a trip to the dealership. This guide will walk you through replacing the battery for your 2015 Altima key fob quickly and efficiently.

While this guide is specifically for the 2015 Nissan Altima, the key fob battery replacement process is similar for many Nissan and INFINITI models from the same era. If you drive any of the following vehicles, you’ll likely find this tutorial helpful:

Nissan Models:

  • Versa
  • Maxima
  • Juke
  • Rogue
  • Murano
  • Xterra
  • Pathfinder
  • Sentra
  • Cube
  • Armada
  • Leaf
  • Quest
  • Frontier

INFINITI Models:

  • 370Z
  • GT-R
  • Titan
  • G25
  • G37
  • M35
  • M37

Parts You’ll Need

The good news is you only need one readily available part to get your key fob back in action:

  • CR2032 3V Coin Cell Battery – This is the standard battery for a 2015 Altima key fob. You can find these batteries at most drug stores, hardware stores, and online retailers. Brands like Panasonic, Energizer, Sony, Duracell, and Maxell all offer CR2032 batteries.

To ensure you’re using the correct replacement, check your Nissan Altima owner’s manual for the original equipment manufacturer (OEM) battery specification. If you’re unsure, you can always bring your key fob to a trusted auto service center for assistance.

Tools Required

You won’t need a lot of tools for this simple task. Just one small item will do:

  • Small Flathead Screwdriver – A mini flathead screwdriver, like those used for eyeglasses repair, is ideal for carefully opening the key fob casing.

Preparation Tips

Before you start, a little preparation can make the process smoother and prevent any damage:

  • Protect the Fob: Use a thin microfiber cloth to cover the tip of your screwdriver. This will prevent scratches on the key fob’s plastic casing and internal electronic components.
  • Remove from Key Ring: Take your key fob off your keyring to give you more room to work and avoid accidentally damaging your keys.

Understanding the Emergency Key

Every Nissan Altima key fob includes a hidden emergency ignition key. This metal key is a lifesaver if your key fob battery dies when you’re away from home. You can access this key to manually unlock your car door using the keyhole located on the underside of your door handle.

Before you can replace the battery for your 2015 Nissan Altima key fob, you’ll need to remove this emergency key. The steps below will show you how.

Step-by-Step Guide: 2015 Nissan Altima Key Fob Battery Replacement

Follow these detailed steps to successfully complete your 2015 Nissan Altima key fob battery replacement:

  1. Position the Key Fob: Place the key fob on a flat surface with the buttons facing downwards.

  2. Remove the Emergency Key: Locate the small release tab on the key fob.

Push the tab towards the edge of the key fob and simultaneously pull the bottom edge of the key fob downwards. The metal emergency key should slide out easily. Set the key aside in a safe place.

  1. Open the Key Fob Casing: Turn the key fob over so the buttons are facing upwards. Look into the slot where you just removed the emergency key. You’ll see two small notches on the bottom plastic edge.

Carefully insert your mini flathead screwdriver into one of these notches. Gently twist the screwdriver to pry apart the two halves of the key fob. If one notch is too tight, try the other. Once you have a gap, carefully separate the top half of the fob from the bottom half.

  1. Replace the Old Battery: With the top half of the casing removed, you’ll see the CR2032 battery for your 2015 Altima key fob.

Use your screwdriver to gently pry out the old battery. Be careful not to scratch any of the surrounding electronic components. Take the new CR2032 battery and push it into place, ensuring the positive (+) side is facing upwards.

  1. Reassemble the Key Fob: Carefully align the two halves of the key fob casing. Gently press them together until they snap securely shut. Make sure all edges are flush.

  2. Reinsert the Emergency Key: Slide the metal emergency key back into its slot until you hear a click, confirming it’s securely locked in place.

Need Further Assistance?

Congratulations! You’ve successfully completed your Battery For 2015 Altima Key Fob replacement. Your key fob should now be working perfectly again.

If you encounter any issues or prefer professional assistance, the service team at your local Nissan dealership or authorized service center is always ready to help.

For more helpful car care tips and maintenance guides, be sure to check out our other articles. And if you’re in the market for a quality pre-owned vehicle, explore our extensive inventory and schedule a test drive today!

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *