If you’re searching for information on a Battery For 2020 Ford Explorer Key Fob, you’ve come to the right place. This guide will cover everything you need to know about replacing the battery in your key fob, from choosing the right battery to step-by-step instructions and troubleshooting common issues.
Which Battery Does My 2020 Ford Explorer Key Fob Need?
Your 2020 Ford Explorer key fob uses a CR2032 battery, a common type of lithium coin cell battery. These batteries are readily available at most electronics stores, pharmacies, and online retailers. It’s always a good idea to keep a spare on hand! You can learn more about programming your Ford Explorer key fob by checking out this helpful resource: 2020 ford explorer key fob programming.
How to Replace the Battery in Your 2020 Ford Explorer Key Fob
Replacing the battery in your 2020 Ford Explorer key fob is a quick and easy process that you can do yourself at home. Here’s a step-by-step guide:
- Locate the release button: On the side of your key fob, you’ll find a small release button. Press this button to release the emergency key blade.
- Separate the key fob halves: Using the emergency key blade or a small flathead screwdriver, carefully pry open the key fob casing. Start at the notch where the key blade was released.
- Remove the old battery: Gently pry the old CR2032 battery out of its compartment. Be careful not to damage the contacts.
- Install the new battery: Insert the new CR2032 battery into the compartment, making sure the positive (+) side is facing up.
- Reassemble the key fob: Snap the two halves of the key fob casing back together.
- Test the key fob: Try locking and unlocking your vehicle to ensure the new battery is working correctly. If you have any issues, check our troubleshooting section below. For additional information on replacing batteries in Ford key fobs, see our guide on replace battery in ford key fob.
Why is My Key Fob Not Working After Replacing the Battery?
Sometimes, even after replacing the battery, your key fob might not work. Here are a few common reasons why:
- Incorrect battery installation: Double-check that the battery is installed correctly with the positive (+) side facing up.
- Dead battery: While rare, it’s possible the new battery is already dead. Try a different battery.
- Key fob programming: In some cases, you may need to reprogram your key fob after replacing the battery. Check your owner’s manual for specific instructions, or visit our guide on programming your 2017 Ford Explorer key fob: 2017 ford explorer key fob programming with push button start.
How Often Should I Replace My Key Fob Battery?
Typically, a key fob battery lasts between 3 and 5 years. However, factors like usage and climate can affect battery life. It’s a good idea to replace the battery preemptively if you notice your key fob’s range decreasing or if it takes multiple presses to activate.
What are some signs I need to replace my key fob battery?
Some common signs include decreased range, needing multiple presses to activate the fob, or the key fob not working at all.
John Smith, a certified automotive technician, advises, “Don’t wait until your key fob completely stops working to replace the battery. Changing it every few years can save you the headache of being locked out of your car.”
Keeping Your Key Fob in Top Shape
Besides replacing the battery, here are a few tips to keep your key fob functioning smoothly:
- Avoid extreme temperatures: Extreme heat or cold can affect battery life.
- Protect from moisture: Keep your key fob dry to prevent damage to the internal components.
Sarah Jones, an automotive electronics expert, recommends, “Think of your key fob as a mini-computer. Protecting it from the elements will extend its lifespan.”
Conclusion
Replacing the battery in your 2020 Ford Explorer key fob is a simple DIY task that can save you time and money. By following the steps outlined in this guide, you can keep your key fob in top working condition. Remember to use a CR2032 battery and check your owner’s manual for any specific programming instructions. For a comprehensive guide on programming your Ford Explorer key fob, visit our dedicated page: how to program ford explorer key fob.
FAQ
- What type of battery does the 2020 Ford Explorer key fob use? It uses a CR2032 battery.
- How long does a key fob battery typically last? Between 3 and 5 years.
- Do I need to reprogram my key fob after replacing the battery? In some cases, yes. Consult your owner’s manual.
- Where can I buy a CR2032 battery? Most electronics stores, pharmacies, and online retailers.
- What should I do if my key fob still doesn’t work after replacing the battery? Double-check the installation, try a new battery, or consult your owner’s manual for reprogramming instructions.
- Can I replace the key fob battery myself? Yes, it’s a simple process.
- What are some signs my key fob battery is low? Decreased range, needing multiple presses, or the Key Fob not working.
For any assistance, contact us via WhatsApp: +1(641)206-8880, or Email: [email protected]. Our customer service team is available 24/7.
Leave a Reply