Programming your 2014 Chevrolet Equinox Key Fob can be a straightforward process, allowing you to regain access and control over your vehicle’s keyless entry system. Whether you’ve lost a key, purchased a new one, or simply want to program an additional remote, this guide will provide you with step-by-step instructions. There are two primary methods to program your key fob: using an existing, recognized key, or performing a 30-minute procedure if you don’t have a recognized key available.
Method 1: Programming a 2014 Chevy Equinox Key Fob with a Recognized Transmitter
This method is quicker and simpler if you already have a working key fob for your 2014 Chevrolet Equinox. Ensure that the key blade of your new key is cut correctly to function in the ignition before you begin the programming process.
-
Insert and Turn the Recognized Key: Place your original, already programmed key into the ignition cylinder. Turn the key to the ON/RUN position. This is the position just before you would start the engine.
-
Turn Off and Remove the Key: Turn the ignition key back to the LOCK/OFF position and then remove the key from the ignition.
-
Insert the New Key and Turn On: Within five seconds of removing the recognized key, insert the new, unprogrammed key into the ignition. Turn this new key to the ON/RUN position.
-
Wait for Security Light: Keep the key in the ON/RUN position. The security light on your dashboard should turn off once the new key has been successfully programmed to your 2014 Chevrolet Equinox.
-
Program Additional Keys (If Needed): If you have more key fobs to program, repeat steps 1 through 3 for each additional key.
This method is efficient for adding extra key fobs as long as you have at least one previously programmed key.
Method 2: Programming a 2014 Chevy Equinox Key Fob Without a Recognized Transmitter
If you do not have any currently recognized or programmed keys for your 2014 Chevrolet Equinox, you will need to follow this more time-consuming procedure. This method is designed to program the first key when no existing keys are available and will take approximately 30 minutes to complete. Make sure your vehicle is turned off and that all key fobs you wish to program are with you before starting.
-
Insert the New Key: Place the new, unprogrammed vehicle key into the ignition cylinder.
-
Turn to ON/RUN: Turn the ignition key to the ON/RUN position. The security light on the dashboard will illuminate.
-
Wait 10 Minutes (Security Light Off): Maintain the key in the ON/RUN position and wait for 10 minutes. After approximately 10 minutes, the security light will turn off.
-
Turn Ignition to LOCK/OFF: After the security light turns off, turn the ignition key to the LOCK/OFF position.
-
Repeat Steps 2-4 Two More Times: Repeat steps 2 through 4 two more times. This means you will go through the 10-minute waiting process a total of three times.
-
Final ON/RUN Turn: After the third repetition of steps 2-4, turn the ignition key to the ON/RUN position one last time. At this point, the new key should be learned by your 2014 Chevrolet Equinox, and any previously known keys will no longer function with the vehicle for security reasons.
To program additional keys after completing this 30-minute procedure, you can now use the method described in “Method 1: Programming with a Recognized Transmitter” at the beginning of this guide.
By following these instructions, you should be able to successfully program your 2014 Chevrolet Equinox key fob and maintain convenient access to your vehicle.
