Are you looking to save money on a new key fob for your 2017 Ford Fusion? Losing a key or simply wanting a spare can be a frustrating experience, often leading to expensive trips to the dealership or locksmith. Fortunately, for 2017 Ford Fusion owners, programming a new Intelligent Access key fob can be done right in your driveway, saving you both time and money. This guide will walk you through the process, step-by-step, making it easy to program your new 2017 Ford Fusion Key Fob without any specialized tools.
What You’ll Need Before You Start
Before diving into the programming procedure for your 2017 Ford Fusion key fob, ensure you have everything prepared. This will make the process smoother and faster. Here’s what you will need:
- Two Previously Programmed Intelligent Access Keys: This method requires two working keys already programmed to your vehicle. These are essential to initiate the programming sequence for a new 2017 Ford Fusion key fob.
- New Unprogrammed Intelligent Access Key Fob: This is the new key fob you wish to program. You can purchase these online from reputable sources like eBay or from a Ford dealership. Ensure it’s a genuine key fob compatible with your 2017 Ford Fusion. For the best deals, searching for “2017 Ford Fusion key fob” online can yield cost-effective options.
- Your 2017 Ford Fusion Manual (Optional but Recommended): While this guide provides detailed steps, having your vehicle’s manual on hand can be a helpful reference.
It’s also important to familiarize yourself with the location of the backup slot for key programming in your 2017 Ford Fusion. This slot is typically located in the cup holder area.
Step-by-Step Guide to Program Your 2017 Ford Fusion Key Fob
Follow these detailed steps to successfully program your new 2017 Ford Fusion key fob. It is crucial to perform each step accurately and within the given timeframes for successful programming.
Preparation Steps
- Turn Off the Ignition: Ensure your 2017 Ford Fusion is completely turned off before you begin.
- Close All Doors: Make sure all doors, including the trunk, are fully closed and remain closed throughout the entire procedure.
- Locate the Backup Slot: In your 2017 Ford Fusion, find the cup holder. You will need to remove the rubber covering at the bottom of the cup holder to access the backup slot. This slot is where you will be inserting the key fobs for programming.
Programming Procedure
- Prepare the First Programmed Key: Remove the emergency key blade from your first programmed Intelligent Access key. Then, remove the rubber covering from the cup holder to expose the backup slot.
- Insert the First Programmed Key: With the buttons facing upwards and the unlock button towards the front of your 2017 Ford Fusion, place your first programmed key into the backup slot.
- Press the Ignition Button (No Brake): Without pressing the brake pedal, press the push-button ignition switch.
- Turn Off and Remove First Key: Wait for five seconds, then press the push-button ignition switch again to turn the car off. Remove the first programmed key from the backup slot.
- Insert the Second Programmed Key: Within 10 seconds of removing the first key, place your second programmed Intelligent Access key into the backup slot and press the push-button ignition switch (again, without pressing the brake pedal).
- Turn Off and Remove Second Key: Wait for five seconds, and then press the push-button ignition switch again to turn the car off. Remove the second programmed key from the backup slot.
- Insert the New Key Fob: Wait for five seconds. Now, place your new, unprogrammed Intelligent Access 2017 Ford Fusion key fob into the backup slot and press the push-button ignition switch (no brake pedal).
- Wait for Confirmation: Within a few seconds, you should see the hazard flashers blink twice, and the doors will lock and then unlock. This indicates that the programming of your new 2017 Ford Fusion key fob is complete.
Verifying the New Key Fob
After completing the steps, it’s crucial to verify that your new 2017 Ford Fusion key fob is working correctly:
- Test Remote Functions: Check if the remote control functions (lock, unlock, panic button, remote start if equipped) are operating as expected.
- Start Your Vehicle: Ensure you can start your 2017 Ford Fusion using the newly programmed key fob.
If you intend to program an additional fourth key, you can simply repeat the entire process from the beginning.
Important Notes and Troubleshooting
- Maximum Keys: You can program a maximum of four keys to your 2017 Ford Fusion.
- Timing is Key: Ensure you carry out each step within the specified time limits (especially the 30-second overall sequence and 10-second intervals between key changes). If you exceed the time, you may need to start over.
- Wait Time: Allow for a 3-5 second wait after pressing the ignition switch in steps 3, 6, and 9 for the system to register the key.
- Unsuccessful Programming: If the programming is unsuccessful on your first attempt, wait for 10 seconds and carefully repeat steps 1 through 7. Double-check that you are using two previously programmed keys and a new, unprogrammed key.
- Dealer Assistance: If you still encounter issues programming your 2017 Ford Fusion key fob, it might be necessary to visit an authorized Ford dealership for assistance.
Programming your 2017 Ford Fusion key fob at home is a straightforward process that can save you significant expense. By following these steps carefully, you can quickly and easily add a new key fob to your vehicle without the need for professional help. Enjoy the convenience and savings of DIY key programming!
