Is your Ford Edge key fob not working as reliably as it used to? A common culprit is a low battery. Knowing the correct Ford Edge Key Fob Battery Type and how to replace it can save you time and hassle. This guide will walk you through identifying your key fob type and changing the battery yourself, ensuring your remote works perfectly again.
Understanding Your Ford Edge Key Fob
Ford Edge vehicles typically come with one of two types of key fobs: the Integrated Keyhead Transmitter (IKT) and the Intelligent Access key (IA key). Both serve the same primary functions – locking, unlocking, and starting your vehicle – but they have slightly different designs, especially when it comes to battery replacement. Regardless of which type you have, replacing the battery is a straightforward process you can easily do at home.
Identifying the Correct Battery Type for Your Ford Edge Key Fob
The good news is that both the Integrated Keyhead Transmitter (IKT) and the Intelligent Access key (IA key) for Ford Edge models generally use the same type of battery: a CR2032 battery. This is a common 3V lithium coin cell battery, widely available at drug stores, supermarkets, and online retailers.
While CR2032 is the standard, it’s always a good practice to double-check the battery type before you purchase a replacement. You can confirm the correct battery by:
- Examining the Old Battery: Once you open your key fob (as described in the steps below), you can see the markings on the old battery itself. It will clearly state the battery type.
- Consulting Your Owner’s Manual: Your Ford Edge owner’s manual will contain information about your key fob and the battery type it requires.
Using the correct Ford Edge key fob battery type is crucial for optimal performance and longevity of your key fob.
Step-by-Step Guide to Replacing Your Ford Edge Key Fob Battery
Here’s how to replace the battery in each type of Ford Edge key fob:
Replacing the Battery in an Integrated Keyhead Transmitter (IKT)
-
Open the Battery Cover: Locate the small slot at the top end of your IKT key fob, near the key ring. Insert a thin coin or a flat-blade screwdriver into this slot. Gently twist the coin or screwdriver. This action will pop open the battery cover.
-
Remove the Battery Cover: Once twisted, the battery cover should easily detach. Carefully remove it to access the battery compartment.
-
Remove the Old Battery: Take out the old CR2032 battery. Note the orientation of the battery (+ side up or down) before removing it. This will help you insert the new battery correctly.
-
Insert the New Battery: Place the new CR2032 battery into the battery cavity, ensuring it’s in the correct orientation (usually + side facing up). Press down on the battery to make sure it is securely seated.
-
Snap the Battery Cover Back On: Align the battery cover back into its position and gently snap it closed until it clicks securely.
Replacing the Battery in an Intelligent Access Key (IA Key)
-
Remove the Backup Key: First, you need to remove the mechanical backup key from the IA key fob. Usually, there’s a small release button or latch on the key fob body. Press or slide this to detach and pull out the backup key.
-
Open the Battery Cover: With the backup key removed, you’ll see a slot where the key was housed. Insert a thin coin into this slot. Twist the coin gently to pry open the battery cover.
-
Remove the Battery Cover: Carefully detach and remove the battery cover to expose the battery.
-
Remove the Old Battery: Take out the old CR2032 battery. Again, pay attention to its orientation.
-
Insert the New Battery: Insert the new CR2032 battery in the correct orientation into the battery compartment and press it down firmly.
-
Snap the Battery Cover Back On and Install Backup Key: Replace the battery cover, snapping it securely back into place. Finally, slide the backup key back into its slot until it clicks and locks in.
Tips for Ford Edge Key Fob Battery Replacement
- Handle with Care: When replacing the battery, avoid touching the battery terminals on the circuit board with your fingers if possible. If you do, it’s generally okay, but avoid wiping off any grease that might be present on the terminals as it can aid conductivity.
- Proper Disposal: Dispose of the old battery responsibly according to your local regulations for battery disposal.
- No Reprogramming Needed: Replacing the battery in your Ford Edge key fob will not cause it to lose its programming. Your key fob should function normally immediately after battery replacement.
Conclusion
Replacing the battery in your Ford Edge key fob is a simple maintenance task that anyone can accomplish. By knowing the correct Ford Edge key fob battery type (CR2032) and following these steps, you can restore your key fob’s functionality and avoid unnecessary trips to the dealership. This DIY approach saves you both time and money, keeping your Ford Edge ownership experience smooth and convenient.
