Losing or damaging your GMC Acadia key fob can be a real hassle. Fortunately, replacing your key fob and programming it yourself is often a straightforward process. As automotive experts at keyfobx.com, we’re here to guide you through the steps of Gmc Acadia Key Fob Replacement and programming, ensuring you get back on the road quickly and securely. This guide provides comprehensive instructions for programming your new GMC Acadia key fob, whether you have existing recognized fobs or not.
Programming Your GMC Acadia Key Fob with Recognized Transmitters
If you still have two working key fobs, the programming process for a new GMC Acadia key fob replacement is relatively simple and can be done in a few minutes. Here’s how:
-
Prepare Your Transmitters: Ensure your vehicle is turned off. Gather all key fobs – the two currently working ones and your new GMC Acadia key fob replacement. Keep them all with you throughout the process.
-
Position Recognized Transmitters: Place your two recognized key fobs in the cup holder of your GMC Acadia. This ensures they are properly detected by the vehicle’s system.
-
Access Key Lock Cylinder: Locate the key lock cylinder cap on the driver’s side door handle. Remove this cap to expose the key cylinder.
-
Initiate Programming Sequence: Insert the vehicle key from your new GMC Acadia key fob replacement into the exposed key lock cylinder on the driver’s door handle. Turn the key counterclockwise (to the unlock position) five times in rapid succession, within 10 seconds.
-
Wait for DIC Indication: After correctly performing step 4, the Driver Information Center (DIC) display in your Acadia will show “READY FOR REMOTE #2, 3, 4, ETC.” This message confirms that your vehicle is now in programming mode and ready to learn a new key fob.
-
Place New Transmitter in Pocket: Locate the transmitter pocket inside the center console storage area, situated between the driver and front passenger seats. Place your new GMC Acadia key fob replacement into this transmitter pocket.
-
Learn New Transmitter: Press the ENGINE START/STOP button. Once the new transmitter is successfully learned, the DIC will display a message indicating it’s ready for programming the next transmitter.
-
Verify Programming: Remove the new key fob from the transmitter pocket. Press either the UNLOCK or LOCK button on the fob. If the vehicle responds, the GMC Acadia key fob replacement is successfully programmed.
-
Program Additional Transmitters (Optional): If you have more GMC Acadia key fob replacements to program, repeat Steps 6–8.
-
Exit Programming Mode: Once you have programmed all desired key fobs, press and hold the ENGINE START/STOP button for approximately 12 seconds. This action will exit the programming mode.
-
Reassemble Key Fob: Put the mechanical key back into your newly programmed transmitter.
Programming Your GMC Acadia Key Fob Without Recognized Transmitters
If you’ve lost all your previous key fobs, or don’t have two recognized transmitters, you can still program a GMC Acadia key fob replacement. However, this process is longer and takes around 30 minutes. Note that this procedure may not be available in Canada.
- Prepare for Programming: Ensure the vehicle is off and gather all GMC Acadia key fob replacements you wish to program. Have them all with you.
- Access Key Lock Cylinder: Remove the key lock cylinder cap on the driver’s door handle as described earlier to access the key cylinder.
- Initiate Learn Mode: Insert the vehicle key of one of your new GMC Acadia key fob replacements into the key lock cylinder. Turn the key counterclockwise five times within 10 seconds.
- Wait for Initial Delay: The DIC will display “REMOTE LEARN PENDING, PLEASE WAIT.” You must now wait for 10 minutes.
- First Learning Attempt: After 10 minutes, the DIC will change to display “PRESS ENGINE START BUTTON TO LEARN.” Press the ENGINE START/STOP button. The DIC will revert to “REMOTE LEARN PENDING, PLEASE WAIT.”
- Repeat Delay and Press Sequence: Repeat Step 5 two more times. Each time, you will need to wait 10 minutes after “REMOTE LEARN PENDING, PLEASE WAIT” appears before pressing the ENGINE START/STOP button when prompted. After the third repetition, all previously programmed key fobs (if any) will be erased from the system’s memory.
- Vehicle Ready for Programming: After the final 10-minute wait and button press, the DIC should now display “READY FOR REMOTE # 1.” This indicates the system is ready to learn your new GMC Acadia key fob replacement.
- Place New Transmitter in Pocket: Place your new GMC Acadia key fob replacement into the transmitter pocket located in the center console.
- Learn New Transmitter: Press the ENGINE START/STOP button. Once the transmitter is learned, the DIC will indicate readiness for the next transmitter.
- Verify Programming: Remove the key fob and press the LOCK or UNLOCK button to confirm successful programming of your GMC Acadia key fob replacement.
- Program Additional Transmitters (Optional): To program more key fobs, repeat Steps 8–10.
- Exit Programming Mode: After programming all desired GMC Acadia key fob replacements, press and hold ENGINE START/STOP for 12 seconds to exit the programming mode.
- Reassemble Key Fob: Insert the mechanical key back into the transmitter.
By following these detailed steps, you can successfully complete your GMC Acadia key fob replacement and programming. For more automotive key fob solutions and replacements, remember to visit keyfobx.com, your trusted source for expert advice and products.
